R911339474 (MSK101D-0202-FN-S3-AB0-NNNN)

How should I prepare the cooling circuit for storage or cold environments?

If the machine is stored or transported, purge the motor’s cooling channels completely to prevent freeze damage and corrosion. Replace protective covers on coolant ports and connectors before storage.

Does the Hiperface singleturn encoder require homing on power-up?

Yes, singleturn feedback provides absolute position only within one mechanical revolution, so multi-turn position is not retained after power loss and a homing or reference strategy is required. The Hiperface protocol transports electronic type-plate data and parameters digitally over an RS-485 parameter channel to simplify drive setup.

How does “A-side” power connector orientation affect panel layout and serviceability?

“A-side” orientation places the power connector on the designated side of the housing, which can reduce bend-radius conflicts in tight enclosures and influence cable chain routing. Plan strain-relief and clearance accordingly to maintain connector IP rating and avoid side-load on the receptacle.

What duty-cycle limits apply if I need short bursts up to the published peak torque?

Peak torque is thermally and drive-current limited; use the speed–torque curves for the MSK101D family to ensure the acceleration profile stays within permissible intermittent regions. Exceeding those curves risks drive shutdowns (overcurrent/overtemperature) rather than improved throughput.

What B2B applications benefit most from the liquid-cooled MSK101 frame with high torque density?

High-duty packaging sealers, CNC spindle positioning/rotary tables, and robotic joints benefit from steady thermal behavior and high continuous torque at low speed. Liquid cooling also helps where ambient air is contaminated or space limits preclude bulky fans.

MSK101D0202FNS3AB0NNNN

MSK101D 0202 FN S3 AB0 NNNN

MSK-101D-0202-FN-S3-AB0-NNNN

The MSK101D-0202-FN-S3-AB0-NNNN from Bosch Rexroth Indramat is a liquid-cooled IndraDyn S Synchronous Servomotor designed for precision automation. It features a 101 frame, D-length housing, 57.0 Nm continuous torque, and Hiperface singleturn encoder for accurate motion control. Commonly used in robotics, CNC machines, and packaging lines, it integrates easily into industrial systems.