Surface leakage: Yes, if housing is corroded
Cooling: Insufficient when dust accumulates
Shaft: Keyway shaft integrated
Shaft sealing ring: Yes, as per DIN 3760 – Version A
Grease: Lifetime under normal conditions
Encoder signal: 1Vss
Encoder current consumption: 150mA
Force endurance: Up to 80N axial force
Performance rating: Derated if optimum conditions are exceeded
Installation: Vertical, no fluid accumulation around the shaft
Operation: By trained personnel
Centering hole: Yes, according to DIN 332 Part 2
Packaging: Rugged packaging used
Power: Proportional to size
Speed: Controlled by connected drive controller
Electrical connection: To B side of device
Concentricity: Increased
Transmission: Only explosion-protected should be used
Storage temperature: Between -20°C and 60°C
Torque: Reduced when using transmissions
Power connector: IP 67 protection rating