R911372115 (MSK100A-0300-NN-M1-AG0-NNNN)

How does natural-convection cooling influence duty capability and enclosure design on MSK100A-0300-NN-M1-AG0-NNNN?

The nNatural-convection (surface) cooling eliminates fan wiring and airflow paths for simplifying sealing and reducing acoustic emissions. Its continuous torque at standstill remains 17.0 Nm with this 0300 winding if installation meets thermal assumptions and ambient 0…40 °C limits.

What does the optical multiturn absolute Hiperface encoder contribute on MSK100A-0300-NN-M1-AG0-NNNN?

It provides absolute position retention across power cycles and supports precise speed/position loops via the Hiperface protocol, while this variant uses 128 signal periods. Its multiturn evaluation in the series enables absolute tracking over multiple mechanical revolutions for minimizing homing sequences.

How do M0,100 = 17.0 Nm and Imax = 45.9 A affect axis sizing for MSK100A-0300-NN-M1-AG0-NNNN?

It defines the thermally permissible continuous torque at 100 K motor overtemperature. Its 54.0 Nm peak torque defines transient acceleration/braking headroom for move profiles and stall-recovery margins.

How does the 11,200 mH winding inductivity of MSK100A-0300-NN-M1-AG0-NNNN impact drive selection and current ripple?

The higher inductivity reduces ripple and PWM-related current ripple at a given switching frequency, for aiding smooth torque. It also narrows electrical bandwidth, so current-loop gains and DC-bus sizing should be chosen to preserve dynamic response.

What environmental and insulation ratings apply to MSK100A-0300-NN-M1-AG0-NNNN, and what do they mean in practice?

The IP65 and insulation class 155 (F) support installation in dusty process areas when proper cabling/gland practices are followed. Respect 0…40 °C ambient and mounting-surface thermal design to maintain S1 torque and bearing life.

MSK100A0300NNM1AG0NNNN

MSK100A 0300 NN M1 AG0 NNNN

MSK-100A-0300-NN-M1-AG0-NNNN

The IndraDyn S Synchronous Servomotor MSK100A-0300-NN-M1-AG0-NNNN from Bosch Rexroth features a plain shaft, optical multiturn absolute encoder with Hiperface interface, and natural convection cooling. It delivers 17.0 Nm continuous torque and 54.0 Nm peak torque, with a rated speed code of 0300 and 11.6 A standstill current. Commonly used in robotics, packaging, and CNC machines, it supports precise motion control tasks.