R911377372 (MSK100A-0450-NN-S1-BP1-NNNN)

It provides absolute position within one revolution and fine interpolation for smooth commutation for improving low-speed stability and repeatability. It combined with stored motor parameters, the drive auto-configures feedback for rapid start-up and consistent alignment.

The higher inductivity filters PWM ripple and supports smoother current transitions for aiding precise torque control under stiff loops. It slightly narrows electrical bandwidth, which the drive compensates with tuning to preserve response around the 13.6 A continuous-current operating point.

The spring-applied brake clamps the shaft for securing vertical or safety-critical axes against drift. On re-energization it releases electrically for enabling controlled homing without back-driving and simplifying functional-safety strategies.

The IP65 resists dust ingress and water jets for supporting operation in wash-down or chip-laden areas. Its specified coating exhibits chemical resistance to dilute acids, alkalis, mineral oils and sewage that extends finish life with limited protection versus some solvents.

The eight magnetic poles give finer electrical angle resolution for improving smoothness and control authority at low speed. Its 6,000 rpm mechanical limit balances torque density with rotor stress for enabling rapid acceleration while staying within drive frequency and bearing constraints.