R911380748 (MSK101C-0450-NN-M2-AG2-RNNN)
MSK IndraDyn S Synchronous Motors
Technical Specifications
Design
ATEX design
Size Code
101
Drive Controller Requirement
Pre-programmed before startup
Protection
Equipped with sleeves and covers
Encoder Type
Optical with EnDat 2.1 interface
Brake Type
Electrically releasing holding brake
Pole Pairs
Four
Installation Elevation
1000m above sea level
Relative Air Humidity During Transportation
75% at 30°C
Climatic Category
1K2
Storage norms
EN 60721-3-1 specifications
Operation Speed Post Storage
800rpm to 1000rpm
Type Designation
Present on type plate and in encoder memory
Dispatch
Through a trusted logistic agent team.
Frequently Asked Questions
How does the EnDat 2.1 multiturn absolute encoder in MSK101C-0450-NN-M2-AG2-RNNN aid precise positioning and homing?
Its multiturn absolute feedback preserves position across power cycles for enabling deterministic startup without mechanical homing switches. Its EnDat 2.1’s serial interface and 2048 signal periods provide fine angle data the IndraDrive class drives can interpolate for tight loops.
Why is the 70 Nm electrically-released holding brake useful on MSK101C-0450-NN-M2-AG2-RNNN?
It secures axes at standstill and during E-stop, especially on vertical or overhauling loads for reducing drift when power is removed. Its safety guidance also recommends mechanically securing vertical axes during maintenance.
What is the benefit of an A-side power connector on MSK101C-0450-NN-M2-AG2-RNNN for machine layout?
The A-side orientation standardizes cable exit relative to the drive end for easing routing, strain-relief and service envelope planning. It explicitly defines connector side options (A, B, L, R) for layout repeatability.
How does “increased concentricity” in this motor’s design influence coupling accuracy?
The tighter runout improves shaft alignment for lessening cyclic radial forces on couplings and bearings. Its result is smoother torque transmission and better repetitive positioning with compliant or zero-backlash couplings.
What control implications stem from the 3,300 mH winding inductivity on MSK101C-0450-NN-M2-AG2-RNNN?
Its higher inductivity attenuates current ripple and PWM harmonics to improve current-loop stability at the expense of electrical time constant. Its drive tuning should balance bandwidth with thermal rise to maintain the specified standstill torque.
Common Misspellings
MSK101C0450NNM2AG2RNNN
MSK101C 0450 NN M2 AG2 RNNN
MSK-101C-0450-NN-M2-AG2-RNNN
Internal Product Review
The Rexroth Indramat’s MSK101C-0450-NN-M2-AG2-RNNN servomotor integrates an optical EnDat 2.1 multiturn (2048 periods) encoderfor feedback and an electrically-released 70 Nm brake system for safe operations. It possesses a plain shaft and A-side power connector for easy cable routing. This unit comes with increased concentricity and supports 110 Nm of maximum torque to handle different applications in industry.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MSK101C-0450-NN-M2-AG2-RNNN.
Want to 
