R911382714 (MSK071C-0300-NN-S3-UG1-NNNN)

Why is the 10,900 mH winding inductivity of the MSK071C-0300-NN-S3-UG1-NNNN valuable to servo current loops?

The higher phase inductance attenuates PWM ripple for reducing dI/dt and electromagnetic emissions while smoothing torque at low speed. It increases current-loop stability margins, permitting higher effective switching frequencies without undue heating or acoustic artifacts.

How does the electrically released 23 Nm holding brake function on vertical axes or suspended loads?

The brake disengages for motion, on power loss or command. It clamps the shaft up to its rated torque to resist back-driving. This aids safe stops, fixture changes and maintenance positioning on Z-axes and gantries.

What do the 14.0 Nm / 8.5 A continuous-at-standstill and 44.0 Nm / 32.9 A peak ratings of the MSK071C-0300-NN-S3-UG1-NNNN mean for cycle design?

The sizing of holding/low-speed segments needs the use of continuous values, while reserve peak torque for short acceleration bursts within thermal limits. It is important to configure the drive’s torque limits and monitor temperature models to maintain margin during index-hold-return profiles.

How does the plain-shaft interface simplify coupling and gearbox selection on the MSK071C-0300-NN-S3-UG1-NNNN?

The cylindrical shaft accepts zero-backlash couplings and inline gearheads for reducing misalignment forces into the bearings. Its radial/axial loads against Rexroth shaft-load charts and bearing-life criteria needs to be confirmed to preserve service life and sealing integrity.

What advantages does the 240° rotatable encoder connector provide in tight cabinets or moving carriages?

It lets clocking the plug away from obstructions to ease bend radii and minimizing cable stress or EMI coupling. Its cleaner service loops improve compliance with wiring best practices and reduce enclosure depth requirements.

MSK071C0300NNS3UG1NNNN

MSK071C 0300 NN S3 UG1 NNNN

MSK-071C-0300-NN-S3-UG1-NNNN

MSK71C-0300-NN-S3-UG1-NNNN

The IndraDyn series servomotor MSK071C-0300-NN-S3-UG1-NNNN from Indramat integrates a plain shaft design and possess a 23 Nm holding brake. It uses natural cooling and includes a capacitive singleturn feedback via a 240° connector. It provides 14 Nm at 8.5 A and 44 Nm of peak torque. This motor is manufactured in a size 71 and length C that eases retrofits in industrial applications.