R911392426 (MSK101D-0300-NN-M2-BP0-RNNN)

How does the optical multiturn absolute encoder with EnDat 2.1 (2048 periods) influence control resolution?

With 2048 signal periods per revolution and multiturn count, the controller can achieve high positional fidelity over many turns and reduce quantization error in closed-loop motion.

What shaft loading (radial/axial) limits should I respect?

The MSK series datasheet defines permissible radial and axial bearing loads for each size to avoid premature bearing failure—exceeding these limits shortens life and impacts positional accuracy.

What is the thermal time constant of this motor, and how does it affect transient loads?

The thermal time constant is 100 minutes, meaning that heat buildup and temperature rise during short bursts is slow—so short overloads are tolerated, but sustained overloads will overheat the motor.

What does “increased concentricity design” bring to real-world performance?

Better concentricity reduces run-out and mechanical vibration in the rotor–stator gap, improving positional accuracy and lowering wear on bearings and adjacent gears in high-precision applications.

What are the implications of selecting the “MSK101D-0300-NN-M2-BP0-RNNN by Bosch Rexroth Indramat” for a multi-axis B2B automation cell?

Its high continuous and peak torque, standardized interface (EnDat 2.1), and modular form factor make it suitable for synchronized multi-axis motion, but you must ensure that your drive controller supports its electrical and feedback interface and that the cooling and mounting demands are met.

MSK101D0300NNM2BP0RNNN

MSK101D 0300 NN M2 BP0 RNNN

MSK-101D-0300-NN-M2-BP0-RNNN

The IndraDyn S Synchronous Servomotor MSK101D-0300-NN-M2-BP0-RNNN by Bosch Rexroth uses an optical multiturn absolute encoder with EnDat2.1 interface and 2048 signal periods. It delivers 57 Nm continuous torque and 160 Nm peak torque with natural convection cooling. This motor is ideal for automation, packaging, and robotics applications requiring precise motion and stable torque output.