SE-B2.010.060-04.000

The Bosch Rexroth Indramat SE-B2.010.060-04.000 servo motor is a high-precision member of the SE Synchronous Servo Motors series, designed to deliver robust performance in industrial automation environments. It features a short ramp-up time of 24 ms for rapid acceleration and a torque constant of 1.10 Nm/A which ensures efficient torque generation proportionate to input current. The motor supports a peak current of 16 A against a continuous capacity of 100 A, facilitating dynamic response to rapid load changes. With an integrated single-phase 400 V winding and a broad frequency range of 50/60 Hz, this servo motor provides versatile compatibility with standard industrial power supplies. Its EMC Level Class A compliance and IP44 protection class guarantee reliable operation in electrically noisy and moderately harsh environments.

The SE-B2.010.060-04.000’s electrical design incorporates an electrical time constant of 6.4 ms and a mechanical time constant of 5.3 ms, enabling tight control over current and speed transients. Thermal management is addressed by an 18-minute thermal time constant which maintains stable temperature under sustained load. The rotor inertia is precisely defined at 0.44 kgm² × 10⁻³, balancing responsiveness and damping for accurate position control. A power loss of 25 W under rated conditions underscores the motor’s efficiency, while the winding resistance of 14.7 Ω optimizes current distribution and minimizes hot-spots. Additional dimensions include a flange size of 100 mm and a compact frame measuring 80 × 398 × 200 mm, providing a low-profile footprint for confined equipment layouts.

Operational reliability is further enhanced by the motor’s power-to-weight ratio of approximately 6.5 kg, with a mass without brake of 6.5 kg and a total weight of 6 kg when fitted. The design’s EMC Level Class A meets stringent industrial standards to prevent electromagnetic interference with adjacent control systems. Continuous regulation of current through the motor’s precise control loop minimizes losses and enables steady output torque even during long duty cycles. The combination of low inertia, rapid ramp-up, and high peak current capability ensures that the SE-B2.010.060-04.000 maintains both speed and torque under dynamically changing loads.

System integration is facilitated by a shaft dimension of 14 × 30 mm and an unbraked length of 230 mm, enabling secure mechanical coupling and straightforward assembly. The robust IP44 protection and Class A EMC rating make it suitable for installation in control cabinets or machine housings with moderate dust and moisture exposure. Its standardized 100 mm flange and 400 V single-phase rating allow drop-in replacement or upgrade of existing servo systems without extensive retrofit. The SE-B2.010.060-04.000 is ideally suited for packaging machines, conveyor drives, pick-and-place units, and other industrial automation applications where precision, efficiency, and reliability are paramount.