SE-LB3.033.030-10.015

The SE-LB3.033.030-10.015 controller module from Bosch Rexroth Indramat is a high-performance component in the SE Synchronous Servo Motors series, designed for precision motion control in industrial automation environments. This Type: Controller Module accommodates a wide Input Voltage Range of 100-240 VAC and features full electrical Isolation between power and control circuits to enhance safety and protect equipment from voltage spikes or ground faults. The unit offers dual Can Interfaces: 2 for robust network connectivity, enabling real-time communication with sensors, actuators, and programmable logic controllers (PLCs). Packaged as a screw-in module, it requires the separate TB712 terminal block for mounting, minimizing cabinet footprint while simplifying installation. With a power consumption of just 14.5 W, this module optimizes energy usage without compromising dynamic performance.

Under the hood, the SE-LB3.033.030-10.015 delivers predictable torque behavior through a static Static torque of 3.8 Nm and a maximum Maximum torque of 9.2 Nm when coupled with the SM 5/10 gearbox. The module achieves full nominal speed in just Ramp-up time to nominal speed of 61 ms, supporting rapid start-stop cycles and minimizing production latency. Peak current capacity reaches Peak current of 46 A, while continuous operation at standstill under static load draws Current at standstill at static torque of 7.7 A, ensuring reliable holding performance in vertical or dynamic axes. The efficient electromechanical conversion is quantified by a Torque constant of 0.49 Nm/A, reflecting the module’s capability to translate electrical input into mechanical output with minimal losses.

Operational resilience is further enhanced by the module’s dual 2 CAN interfaces, enabling synchronized motion control and fault-tolerant networking in multi-axis configurations. Integrated network capability allows seamless data exchange for diagnostics, predictive maintenance, and motion coordination. The electrically isolated power supply interface reduces EMI susceptibility and safeguards downstream devices from transients, supporting compliance with industrial EMC requirements. Mounting as a compact, screw-in unit (with the separately ordered TB712 block) streamlines panel design and enables rapid module replacement during maintenance cycles.

System integrators can pair the SE-LB3.033.030-10.015 with Bosch Rexroth drives and inverters to form a cohesive motion-control architecture, leveraging standardized communication protocols over its CAN networks. The module’s attributes—part_number: SE-LB3.033.030-10.015, manufacturer: Bosch Rexroth Indramat, and series: SE Synchronous Servo Motors—make it especially suitable for precision assembly equipment, packaging lines, and robotics applications where compact size, dynamic response, and energy efficiency are paramount.