HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW

HCS IndraDrive Controllers

In Stock, Ships Today

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

3 Minutes 57 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth Indramat HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW drive is in the HCS IndraDrive Controllers series and uses internal air cooling. It has a SERCOS III interface, STO and SBC safety functions, and firmware is ordered separately. The unit runs on 3xAC 200-500 V +/-10% and provides up to 8 A peak current.

Technical Specifications

Communication Interface
SERCOS III

Pairing Note
Paired with Control Section Design 'ECONOMY' (E)

Control Section Design Type
ECONOMY

Cooling Method
Air, internal (through integrated blower)

IP Rating
IP20

Design Version
1

Firmware Order Note
Firmware must be ordered as separate sub position

Other Design Features
None

Interface 1 Type
Encoder IndraDyn Hiperface/EnDat 2.1/2.2

Interface 2 Type
Not equipped

Safety Interface
STO (Safe Torque Off) and SBC (Safe Brake Control)

Line Series
HCS01

Mains Voltage
3 x AC 200...500 V ±10%

Device Peak Current
8 A

Power Supply Unit
Infeeding / Feeded

Product Type
HCS Drive Controller

Frequently Asked Questions

How does HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW achieve deterministic motion control?

By using SERCOS III it delivers cycle-synchronous communication that minimizes jitter and ensures coordinated command timing across multiple drives. This determinism enables precise trajectory control and reliable multi-axis coordination in production environments.

What safety mechanisms are present in HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW and what is their role?

The controller includes electronic torque removal and brake control features to ensure motors cannot produce torque during safety events and brakes are engaged when required. These mechanisms reduce the risk of accidental movement and meet standard functional safety practices when validated.

How does the IP20 rating affect environment selection for HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW?

IP20 is intended for protected indoor cabinets and does not provide liquid ingress protection. In corrosive or dusty settings, use additional enclosure measures to keep the device within its operational assumptions and preserve longevity.

What encoder connectivity does HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW provide for feedback loops?

The unit accepts IndraDyn Hiperface and EnDat encoder standards for high-precision feedback and diagnostics. This facilitates tight control loops, reduced overshoot and better repeatability under varying load conditions.

What validation steps are recommended before launching HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW into production?

Run end-to-end tests including SERCOS synchronization under load, STO response validation, encoder signal quality checks and thermal profiling. Record and version-control the firmware and parameter snapshots to enable repeatable rollouts and rapid problem resolution.

Common Misspellings

Internal Product Review

Bosch Rexroth's HCS01.1E-W0008-A-03-E-S3-EC-NN-L4-NN-FW is a top rated model that pairs deterministic SERCOS III communication with dual safety provisions, packaged in a compact blower-cooled converter. The unit’s design prioritizes consistent thermal margins and predictable behavior under continuous duty in cabinet-dense automation systems.