HDS14.2-W200N

HDS Drive Controllers

Rated 4.5 stars (10 total reviews)

In Stock, Ships 2-3 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

6 Minutes 20 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

The HDS14.2-W200N is a 19 kg HDS Drive Controller with an internal air blower. Manufactured by Bosch Rexroth Indramat in the HDS Drive Controllers series, it provides 200 A rated current and continuous currents of 120 A at 4 kHz or 80 A at 8 kHz. It has insulation class C per DIN VDE 0110, consumes 30 W for signal processing, incurs 800 W power loss and offers IP10 protection.

Technical Specifications

Cooling Method
Built-in Internal Air Blower

Other Versions
None

Product Type
HDS Drive Controller

Rated Current
200 A

Version
2

Command Communication
Not Equipped

Continuous current(4kHz/8kHz)
120/80A

Insulation classification
C as per DIN VDE 0110

Power consumption for signal processing
30W

Power loss with continuous current
800W

Protection class
IP10 according to DIN 40 050

Storage and transport temparature
-30 to +850C

Weight
19kg

Frequently Asked Questions

How does the continuous current rating drop from 120 A at 4 kHz to 80 A at 8 kHz affect performance in fast-switching applications?

Higher switching frequency increases switching losses, so at 8 kHz the unit can only sustain 80 A continuously, meaning in high dynamics tasks you may need to derate or ensure cooling is superior.

What installation spacing and cabinet ventilation are required to avoid overheating?

Because of the ~800 W loss, install with sufficient clearance around blower inlets and exhausts, ensure cabinet air exchange is high, and avoid nearby heat sources—otherwise ambient temp rise will severely reduce component lifetime.

How does insulation class C (DIN VDE 0110) impact operating environment and safety?

Insulation class C allows higher temperature tolerance of winding insulation and components (higher thermal stress), so the drive can operate under more severe ambient temperature swings without immediate insulation breakdown.

What implications does the “signal processing power consumption” of 30 W have on overall electrical budgeting?

Though 30 W is small relative to losses, it still contributes to the internal heat and must be included in the local power supply and cooling load calculations, especially in systems with many drives or tight power margins.

What are the startup or transient stress concerns for HDS14.2-W200N during motor accelerations or high torque jumps?

Large torque or rapid acceleration demands push current near or above continuous ratings briefly, causing high transient currents and thermal spikes; ensure DC bus supply and overcurrent protection accommodate those peaks, and verify that cooling and thermal mass can absorb these transients without damage

Common Misspellings

Internal Product Review

The HDS14.2-W200N drive controller from Bosch Rexroth is a 200 A unit with built-in internal air blower cooling and 30 W signal processing power. It operates between -30°C to +85°C and weighs 19 kg, with insulation class C and IP10 protection. Commonly used in CNC machines, robotics, and industrial automation systems.