HMS01.1N-W0350-A-07-NNNN

HMS Axis Inverters

Rated 4.7 stars (9 total reviews)

In Stock, Shipping Varies

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth Indramat HMS01.1N-W0350-A-07-NNNN inverter from the HMS Axis Inverters series is a high-performance Single Axis Inverter designed for industrial automation. Featuring internal air with integrated blower cooling, it operates on a nominal DC bus voltage of DC 700 V and an input voltage range of 254 to 750 V DC with an input current rating of 115 A and a rated maximum current of 350 A. Protected to IP20 and rated for operation from 0 to +40 °C, it consumes 218 W and uses a 24 V control voltage. Fully compatible with MLD automation systems, this HMS unit ensures stable operation during malfunctions.

Technical Specifications

Cooling Type
Internal Air with Integrated Blower

Nominal DC Bus Voltage
DC 700 V

Protection Class
IP20

Design Version
1

Line Version
1

Rated Maximum Current
350 A

Internal Power Supply
Not Equipped

Product Type
HMS

Compatibility
MLD automation systems

Fault Tolerance
Ensures stable operation during malfunctions

Input Current Rating
115 A

Input Voltage Range
254 to 750 V DC

Operating Temperature
0 to +40 degrees C

Power Consumption
218 W

Rated Control Voltage
24 V

Frequently Asked Questions

What cooling requirements should be met to ensure reliable thermal performance of the HMS01.1N-W0350-A-07-NNNN (Bosch Rexroth)?

To maintain safe junction temperatures, adequate airflow through the internal blower is needed and ambient temperature must remain within 0-40 °C; high duty cycles or reduced cooling airflow will require de-rating the current

What is the difference between constant current capability versus peak or rated maximum current in this inverter?

Although the driver can reach a maximum current of 350 A, its continuous (or “constant”) current rating is lower (≈ 250 A) to avoid thermal stress, so for sustained operation design for the continuous current limit.

What control voltage supply is required, and what are the implications of the unit not having an internal power supply?

The control and logic circuits require 24 V, but since the unit is “not equipped” with internal power supply, you’ll need an external 24 V source with enough capacity; failure or instability there can cause control malfunctions or loss of safety interlocks.

What safety grounding and wiring cross-section should be used with this inverter to satisfy UL / EMC and safety standards?

Motor connections and grounding must follow specified copper cross-section wire (material: Cu, conductor temp rating 60/75 °C), with proper grounding of the frame, ground straps, and EMC shielded cable to meet the EMC / UL specifications in the manual.

How much power dissipation (losses) should one budget for continuous operation at the rated constant current?

At continuous current and with nominal DC bus usage, power dissipation can reach up to ~2750 W based on UL specs for this power class, meaning substantial cooling and heat sink/enclosure design must be accounted for.

Common Misspellings

Internal Product Review

The Bosch Rexroth HMS01.1N-W0350-A-07-NNNN is a HMS Axis Inverter designed for MLD automation systems, featuring a nominal DC bus voltage of 700 V and a maximum current of 350 A. It operates with an internal air cooling system and provides reliable performance with IP20 protection. This drive controller is ideal for applications in robotics, material handling, and manufacturing automation.