The VT-HACD-2-1X-V0-1-0-0 is a user-friendly digital control card manufactured by Bosch. It comes with a display but does not include a bus connection or valve output stage. It can be programmed through the use of BODAC software, available as a free download from the manufacturer’s website. The card also comes with an RS-232 serial interface which can be used to transfer the parameter file to the control card from a computer, using serial connection. No specific programming knowledge is required to configure it, and users can simply link pre-established functional components. The microcontroller on the card facilitates digital processing. All necessary data, such as configuration, command values, and parameters, are stored in a non-volatile flash. The nominal operating voltage of this device is 24 Volts DC, and it operates within the voltage range of 21 to 30 Volts DC. It has a built-in 4 Amps safety fuse. To ensure effective use, avoid placing the card near sources of electromagnetic interference such as power cables, aerial lines, radios, and radar systems.
Device Type: Digital Control Card Display: Included Bus Connection: Not available Valve Output Stage: Not available Programming Software: BODAC software (not included) Parameter File Creation: Offline Parameter File Transfer: Over a serial connection via PC Serial Interface: RS-232 Configuration: Simple, no programming knowledge necessary Format: Euro-card format Onboard Microcontroller: Included for digital processing Data Storage: Non-volatile flash Nominal Operating Voltage: 24 Volts DC Operating Voltage Range: 21 to 30 Volts DC Safety Fuse: 4 Amps rated Power Cable Positioning: Must not be laid in the immediate vicinity Distance to Aerial Lines, Radios, Radar Systems: Must be at least 1 mete