The VT-HACD-515-1X-V0-EFF00323 is an industrial axis controller, expertly engineered by Rexroth Indramat, to effectively generate, link and standardize signals in an industrial setting. This controller possesses six analog inputs and three analogue outputs, all capable of receiving a voltage of approximately ±10 volts and accepting an input current ranging between 4 and 20 milliamperes. In addition, it possesses eight digital inputs and seven configurable digital outputs, as well as a parameterizable ramp function. Optimum operation can be achieved with the supplementary use of accessories including a RS232 USB converter, a 3-meter interface connection cable, and a PROFIBUS DP electrical connector. The controller operates best at ambient temperatures ranging from 0 to 50 degrees Celsius, but can withstand temperatures up to 70 degrees Celsius during transportation. It’s crucial to note that the analogue interfaces can generate a leakage current up to 0.4 percent, demanding proper grounding before usage. The VT-HACD-515-1X-V0-EFF00323 arrives tested with default settings. In the event of a breakdown, only complete devices should be sent for repair, post which users will need to transfer all parameters and programs again.
Designer: Rexroth Indramat Function: Axis controller Analogue Inputs: 6 Input Voltage: ±10 volts Input Current: 4-20 milliamperes Analogue Outputs: 3 Digital Input: 8 Digital Output: 7 Ambient Temperature for Installation: 0-50 degrees Celsius Storage Temperature: up to 70 degrees Celsius Leakage Current: 0.4 percent Quality Standards Compliance: Internationally accepted quality standards Post Repair Procedure: Transfer of all user parameters and programs.