VT-HACD-DPQ-2X-V1-1-C-0

Description

The VT-HACD-DPQ-2X-V1-1-C-0 is a digital controller card designed and manufactured by Rexroth Bosch Group. Weighing at 0.2 kilograms, it offers advanced features including 32 blocks of controller parameters, speeds, and command values tailored for substitutional closed-loop control. The model incorporates optional state feedback and a PIDT1 microcontroller. Digital inputs and outputs on the unit operate distinctly, with voltage ranges of 0-5V and 16-24VDC for Log 0 and Log 1 respectively. Connection interfaces include the RS232 serial and the SSI digital position transducer equipped with an RS485 line receiver. This controller card operates at a temperature range of -20 to +70 degrees Celsius and exports a reference voltage of +/-10V. It utilizes 64 MB of RAM when interfaced with a personal computer. With a quick scan rate of 2ms and a 64-pole male multipoint DIN 41612 connection, its analog output can be calibrated as a current output within a range of 0 to 20 mA or 4 to 20 mA under 500-ohm load. The device uses a current of 150mA, protected by a 4A lagged fuse. Distributed globally by Indramat USA, customers are assured of a replacement warranty in cases of defects or malfunction.

---