VT-HACD-DTC-11-V2-1-C-0

VT-HACD Digital Axis Controllers

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

5 Minutes 23 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

The VT-HACD-DTC-11-V2-1-C-0 is a premier digital controller card, offered by Bosch Rexroth, specifically designed for a range of industries from small businesses to large corporate enterprises. This model is equipped with a 64-pole male multipoint connection that aligns with DIN 41612 standards. It can execute position control via either force control or overlaid pressure. The card has analog current inputs with a range from 0 to 20 mA or 4 to 20 mA and a resolution of 5 microamperes. It lacks both a bus connection and a valve output stage. The card's analog outputs can be varied through adjusting and amplifying, and the digital outputs can configure the internal and error flags. Operating on a voltage range between 21 V and 30 V, the card also includes a 4 A time lag fuse. Monitoring facilities on the card include memory, internal voltages, the 10 V reference voltage, and supply voltage. The product must be used within a temperature spectrum of 0 to +50 degrees Celsius, weighs 0.2 kg and has dimensions of 100 x 160 mm.-accompanied by an SSI digital position transducer with an RS485 line receiver. The standard model has a scan rate of 2 ms and a current consumption of 150 mA.