The VT-HACDI-1-1X-V0-1-0-0 is a top-grade industrial automation component by Bosch Rexroth. It utilizes a microcontroller for various operations, such as customization, execution of closed control loops, establishing connections, and supervising the overall process. The unit features an incremental sensor with a signal range of 5 to 24 V and overall weight of 0.2 kg. Absence of a valve output stage characterizes the VT digital command value and controller card, which does, however, have a front display. With the BODAC PC application but without a jumper, it can be programmed, arranged, and diagnosed. The model allows adjustment of six analog inputs and two or three analog outputs via the software based on requirements. This model also incorporates an RS232 serial interface and operates optimally within temperature limits of 0 and +50 degrees centigrade. The device's coil resistance ranges from 130 to 164 ohms across coil connections 1 and 2. The VT-HACDI-1-1X-V0-1-0-0 also features a 4A time-lag fuse, operates best with a 24VDC voltage, and uses a standby current of 250 mA. Its digital outputs can sustain a maximum of 30 mA current.
Sensor Type: Incremental sensor Sensor Signal Range: 5 to 24 V Weight: 0.2kg Display: Front display Programming: Without a jumper using BODAC PC application Input Nonlinearity: Less than 10 mV Output Current: 10 mA Resolution: 10mV Ripple without Noise: +/-25V Serial Interface: RS232 Operating Temperature: 0 to +50 degree centigrade Coil Resistance (Coil Connections 1 and 2): 130 to 164 ohms Fuse Rating: 4A Optimal Operating Voltage: 24 VDC Standby Current: 250 mA Maximum Digital Output Current: 30 mA