The Bosch Rexroth Indramat VT-HMC-1-10/M-0-00/00 is a high-performance axis controller from the VT-HMC Digital Axis Controllers series. Designed for single-axis positioning tasks, it provides 4 or 8 ch, 14-bit resolution analog inputs and supports a wide range of industrial network protocols. With integrated support for EtherCAT, PROFINET RT, Sercos III, EtherNet/IP, Powerlink, and PROFIBUS DP, this device ensures seamless communication within multi-Ethernet automation environments. Its primary application is precise motion control in industrial machinery, enabling fast and accurate positioning under varying load conditions.
Built around a nominal 24 VDC operating voltage (17.5 to 30 VDC range), the VT-HMC-1-10/M-0-00/00 leverages advanced controller functions including position, velocity, force, pressure, and closed-loop control. It features 2 or 4 ch, 16-bit analog outputs (–10 to +10 V, 0–20 mA) alongside configurable digital inputs (4 or 8 ch) and outputs (2 or 4 ch) with ground-referenced thresholds. Parameterization is handled via a standard Ethernet interface, supporting a minimum scan time of 0.5 ms to achieve rapid control cycles. Power loss remains below 8 W in single-axis mode and 14 W in two-axis operation. Weighing only 0.6 kg, this compact controller integrates easily into existing control cabinets.
Constructed to withstand harsh industrial environments, the unit operates reliably from –20 °C to 60 °C and up to 2000 m altitude. It conforms to IP20 (EN 60529) protection standards and meets EN 60715 mounting requirements for TH35-7.5 or TH35-15 rails. With robust temperature tolerance and low power dissipation, the controller delivers high efficiency and long-term durability. Its multi-bus compatibility and versatile I/O configurations reduce system complexity and installation costs. The VT-HMC-1-10/M-0-00/00 ultimately enhances productivity and precision in industrial automation applications by providing reliable, compact, and flexible axis control.
Analog inputs
4 or 8 ch, 14-bit, -10 to +10 V, 4-20 mA, 200 kΩ ±10%
Analog outputs
2 or 4 ch, 16-bit, -10 to +10 V, 0-20 mA
Controller functions
Position, pressure, force, velocity, closed-loop control
Digital inputs
4 or 8 ch, low –3 to +5 V, high 11 to UB V, GND ref
Digital outputs
2 or 4 ch, low 0 to 3 V, high 14.5 to UB V, 50 mA
Maximum altitude
2000 m
Operating temperature range
–20 °C to 60 °C
Operating voltage range
17.5 to 30 VDC (nominal 24 VDC)
Parameterization interface
Ethernet
Power loss
<8 W (single-axis), <14 W (two-axis)
Protection class
IP20 (EN 60529)
Supported fieldbuses (fieldbus)
PROFIBUS DP (max.12 MBaud), Sercos III
Supported fieldbuses (Industrial Ethernet)
PROFINET RT, EtherNet/IP, EtherCAT, Powerlink
Weight
0.6 kg