DDS02.1-W050-DL09-00

The Bosch Rexroth Indramat DDS02.1-W050-DL09-00 from the DDS Drive Controllers series delivers precision and robust performance with a Rated Current 50 A under continuous operation. This Internal Cooling unit features Digital Servo Feedback for accurate motor control and includes a Function ID code 09 for seamless system identification. A Ready-to-operate contact closes when the drive is primed to receive power, handling up to 24VDC/1A switching capacity. Integrated Two analog diagnostic outputs provide real-time internal variable monitoring for advanced diagnostics and testing.

Installation and connectivity are straightforward: the drive supports a Three-phase connection for motor power alongside adjacent mounting via DC bus rails. Control electronics are supplied through the X1 connector, while configuration and monitoring are conducted over the RS232 interface. Signal lines are routed with D-subminiature connectors or plugin clamps, and the L+, L- and PE terminals secure wiring with M5 screws with 3 Nm torque to ensure reliable grounding and safe operation.

Designed for cabinet installation, the controller mounts on the rear panel with a mandatory 80 mm clearance above and below to facilitate adequate airflow—cool air enters at the base, and hot air exits at the top. The enclosure meets IP10 protection per DIN 40 050, safeguarding against solid objects over 50 mm. For optimal system layout, high-output drives should be placed closest to the supply unit, and when shipped, the device is backed by a one-year Wake Industrial warranty for added peace of mind.