The DKC03.3-018-3-MGP-01VRS is a DKC Drive Controller from Bosch Rexroth Indramat's DKC Drive Controllers series. It delivers a rated current of 18 A at a DC-bus nominal voltage of 300 V, featuring Multi interface, general purpose firmware version 01. With IP20 protection and insulation resistance of 25 MΩ at DC 500 V, it operates from 5 °C to 45 °C with thermal derating of 2%/°C above 45 °C, supporting industrial automation needs.
DC-bus nominal voltage
300 V
Design Version
3
Firmware
Multi interface, general purpose
Firmware Version
01
Series
03
Product Type
DKC Drive Controller
Rated Current
18 A
Coupling capacitance (power/housing)
200 nF
Degree of contamination
2 (EN 50178, no condensation)
Ingress protection
IP20 (EN 60529)
Insulation resistance
>25 MΩ at DC 500 V
Max installation altitude
1000 m
Max relative humidity
95% non‑condensing
Operating temperature
5 °C to 45 °C
Safety standard
DIN VDE 0470-1 (IEC 529-1989)
Storage temperature
-30 °C to 85 °C
Thermal derating
2%/°C above 45 °C to 55 °C
Vibration acceleration (57–500 Hz)
2 g
Vibration amplitude (5–57 Hz)
0.3 mm p-p