DKC02.3-012-3-MGP-01VRS
DKC Drive Controllers
The DKC02.3-012-3-MGP-01VRS is a DKC Drive Controller from Bosch Rexroth Indramat's DKC Drive Controllers series, offering 300 V DC-bus nominal voltage, 380 to 480 V AC input voltage and 24 Volts DC control voltage. Rated for 12 A, it runs Multi interface, general purpose firmware v01, mounts vertically, meets UL 508 C, voltage category 3, and operates up to 45 degrees Celsius.
Technical Specifications
Altitude For Rated Data
1000 m
Connected Load
1.4 kVA
Continuous Dc Bus Power
457 W
Dc Bus Peak Power
1469 W
DC-bus nominal voltage
300 V
Design
3
Design Version
3
Device Mass
1.4 kg
Firmware
Multi interface, general purpose
Firmware Version
01
Interface Option
02
Internal Bleeder Resistance
100 Ohm
Max Ambient Temp (derated)
55 °C
Max Relative Humidity
90 %
Product Type
EcoDrive
Rated Current
12 A
Series
02
Soft-start Resistor
4.7 Ohm
Soft-start Resistor Power
17 W
Frequently Asked Questions
How does the DC control supply impact logic power management in the DKC02.3-012-3-MGP-01VRS during system-level resets?
It operates on a 24 V DC control supply, which keeps internal logic and diagnostics alive during main power loss. This ensures controlled shutdown and accurate fault capture.
How does the input voltage compatibility of the DKC02.3-012-3-MGP-01VRS affect integration into standard industrial power networks?
It supports an input range of 380–480 V AC, allowing direct connection to three-phase plant power. This avoids the need for upstream voltage conversion hardware.
How does the current delivery behavior of the DKC02.3-012-3-MGP-01VRS support stable motion under variable load?
It delivers a continuous output current of 12 A, enabling consistent torque for light-to-medium servo tasks. The output remains stable during frequent speed transitions.
What design constraints must be considered when installing the DKC02.3-012-3-MGP-01VRS into multi-axis enclosures?
The unit is designed for vertical mounting, which aids in natural convection airflow. This orientation prevents heat stacking and supports thermally efficient layouts.
How does the firmware structure of the DKC02.3-012-3-MGP-01VRS support device-level configurability in automation frameworks?
It uses a multi-interface firmware variant, offering broad compatibility with standard motion control systems. This improves integration speed and reduces firmware-level custom tuning.
Common Misspellings
DKC 02.3-012-3-MGP-01VRS
DKC02-3-012-3-MGP-01VRS
DKC02.3-012-3-MGP-01
DKC02.3-012-3-MGP-01-VRS
DKC0230123MGP01VRS
DKC2.3-012-3-MGP-01VRS
DKCO2.3-012-3-MGP-01VRS
DKC02 3 012 3 MGP 01VRS
dkc02.3-012-3-mgp-01vrs
Internal Product Review
The Bosch Rexroth Indramat DKC02.3-012-3-MGP-01VRS is a reliable drive controller rated at 12 A. It delivers a 300 V DC-bus nominal voltage, supports 380 – 480 V AC input, and uses a 24 V DC control supply with versatile multi-interface firmware. This controller unit is designed for vertical mounting.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the DKC02.3-012-3-MGP-01VRS.
Want to 
