DKC04.3-008-3-MGP-01VRS

DKC Drive Controllers

In Stock, Ships Today

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The DKC04.3-008-3-MGP-01VRS is an industrial automation device produced by Bosch Rexroth, configured to oversee and control MSM synchronous motors' operations. This drive controller belongs to the EcoDrive Cs drive system series and features an InterBus interface that enables immediate communication between the controller and motor. It uses an external power supply unit to generate a dc-link voltage of 300 VDC, which is fed into the drive controller. The device runs on either single-phase or three-phase AC 200–240 V power supply with ±15% tolerance and a system frequency of 50–60 Hz. The unit consistently delivers a power and current of 0.7 kVA and 8 A respectively. It houses an H1 display, S1 button, and S2, S3 address switches within its operator panel for manual programming. This roughly 1.8 kg controller fits into the IP20 protection category hence it requires installation in a minimum IP54 protection category control cabinet. It operates best at 0 to +40 degree Celsius and at maximum elevation of 1000 m/sea level, dissipating 31.3 W of power at an 8 kHz PWM frequency during uninterrupted operation. Fitted with an external brake resistor for preventing overvoltage, it gives a continuous dc-bus power of 253 W. It uses a multi-interface general-purpose firmware.