DKC05.3-004-3-MGP-01VRS

Description

The DKC05.3-004-3-MGP-01VRS is a high-performance industrial automation component, developed by the reputable Rexroth Indramat. Specifically designed to operate the MSM synchronous motor within the EcoDrive Cs drive system, this controller model requires installation within a switchgear cabinet offering minimum IP54 protection. With a built-in multi-interface general purpose firmware and CANopen interface, data readily flows between the motor and drive controller. An RS232/RS485 serial interface boosts connectivity, allowing numerous output devices to be linked. Operating effectively within AC 200 – 240 V single-phase and three-phase mains input voltage margins, with the frequency of tolerated input voltage at 50/60 Hz, the unit delivers an output frequency range of up to 333.3 Hz. Customarily operating at 4 A, the model yields a continuous output current of 1 A. Enhanced with a soft-start resistor and an 8 kHz PWM frequency, the controller safely withstands a power dissipation of 24.7 W under extreme loading conditions. The internal circuitry of the controller depends on a 300 VDC dc-bus voltage, while its internal braking resistor continuously dissipates 17 W. The model thrives within a temperature range of 0 to +40 degree Celsius, with the installation maintaining prescribed clearances.

---