R911285104 (DKC01.3-200-7-FW)
DKC Drive Controllers
Technical Specifications
Product Type
ECODRIVE drive controllers
Startup
Easy
Parameter Matching
Automatic
Holding Brake Control
Integrated
Operation
Highly Dynamic
Position Control
Integrated
Stepper Interface
Yes
Electronic Gearbox Function
Yes
Analogue Speed Interface
Yes
Maximum Installation Height
1000 meters
Relative Humidity
95%
Absolute Humidity
25g/m3
Ambient Storage Temperature
-30 to 85 degrees
Operating Temperature
0 to 45 degrees
Cooling Method
Natural Air
Weight
4.4 kg
Protection Category
IP 20
Current Type
200 A
Rated Circuit Voltage
700 V
Firmware
Ordered Separately
Control Cabinet
Required
Operating Modes
Speed and angle synchronization
Lead Axis Encoder
Connected to stepper interface
Independently Weighted Data
Speed, position, acceleration.
Frequently Asked Questions
What operational safeguards support the DKC01.3-200-7-FW in thermally active automation systems?
It functions reliably between 5 and 45 °C, meeting the demands of most industrial temperature zones. CE and C-UL certifications ensure safe performance under compliant installation practices.
How does the firmware version in the DKC01.3-200-7-FW affect compatibility with multi-axis motion systems?
It runs the MGP-01VRS firmware, offering stable communication across synchronized drive environments. This improves control loop reliability during parallel servo operations.
What voltage conditions should be maintained when deploying the DKC01.3-200-7-FW in fast-response drive networks?
The controller operates with a 700 V DC bus, allowing faster energy delivery during rapid motor acceleration. This benefits high-speed applications that require sharp torque response.
How does the current rating of the DKC01.3-200-7-FW influence system behavior under full-duty motion loads?
It delivers a continuous current of 200 A, supporting large-scale servo motors without external amplifiers. This maintains thermal stability during long production cycles.
How does the DKC01.3-200-7-FW accommodate diverse installation environments across global facilities?
It supports both single-phase and three-phase mains, simplifying integration across varying power infrastructures. No transformer is needed for standard industrial inputs.
Common Misspellings
DKC 01.3-200-7-FW
DKC01-3-200-7-FW
DKC01.3-200-7
DKC01.3-200-7FW
DKC0132007FW
DKC1.3-200-7-FW
DKCO1.3-200-7-FW
DKC01 3 200 7 FW
dkc01.3-200-7-fw
Internal Product Review
The DKC01.3-200-7-FW is a Bosch Rexroth Indramat controller with a rated current of 200 A. It offers a 700 V DC bus, supports single or three-phase mains, and operates reliably from 5 to 45 °C with CE and C-UL certifications. It runs on MGP-01VRS firmware.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the DKC01.3-200-7-FW.
Exchange
Want to sell your DKC01.3-200-7-FW?
