1-888-551-3082 | 1-919-443-0207 | [email protected]

R911333970 (DKC10.3-004-3-MGP-01V24)

DKC Drive Controllers

  In Stock, Ships Today
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping
The R911333970 (DKC10.3-004-3-MGP-01V24) is a Rexroth Indramat servo drive controller designed for precise control of servo motors in industrial automation applications. It supports an input voltage range of 200–240 V AC and has a rated output current of 4 A with a DC-bus nominal voltage of 300 V. The unit features a stop-start resistor of 4.7 ohms (17 W power consumption) and supports a braking resistor capable of 1.68 kW maximum power dissipation. The controller conforms to contamination degree 2 as per EN 50178 and has an IP20 enclosure rating. Installation requires minimum clearances of 10 mm horizontally and 100 mm vertically. The firmware is a multi-interface general-purpose version 01, and the device is classified in the DKC Series 10, design version 3. Use must comply strictly with the guidelines provided in the technical documentation.

Technical Specifications

Product Type
Servo Drive Controller

Horizontal Installation Distance
10 millimeters

Vertical Installation Distance
100 millimeters

Degree of Contamination according to EN 50178
2

Protection Category
IP20

Maximum Output Current
39.8 watts

Rated Current
4 amperes

Operating Voltage
200-240 volts

Nominal Input Current
1.1 Amperes or 0.7 Amperes (depends on interface)

Stop-Start Resistor
4.7 ohms

Continuous Power Consumption of Stop-Start Resistor
17 watts

Maximum Power Consumption of Braking Resistor
1.68 kilowatts

Common Misspellings

Shipping & Payment Options
DHL-logo FexEd-logo UPS-logo freight-icon

AmEx-icon Mastercard-icon Visa-icon wire-transfer-icon
Warranty
1-year-warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the DKC10.3-004-3-MGP-01V24.
Indramat Is Trusted By
motion-industries-logo
3m-logo
IBM-logo
GexPro-logo
caterpillar-logo
nasa-logo
ford-logo
vallen-logo