The Bosch Rexroth Indramat ADP104C-B05OA2-CS0H-C2N1 from the ADP 3-Phase Induction Motors series combines robust construction with precise electrical design. Featuring a Design B05 housing and a Plain Shaft with Shaft Sealing Ring output shaft, this motor delivers reliable torque in machine tool applications. Its Power Connection output direction A-Side Connector and Power Connector Position Top simplify power supply routing and enable flexible cabinet layouts. The RSF-wound CS winding, complemented by a DS centering-hole thread per DIN 332, optimises thermal dissipation and mechanical alignment throughout the 1,600 min⁻¹ rated speed.
Installation and operation are supported in any orientation, with grease-lubricated standard ball bearings ensuring low-friction rotation and long service life. Integrated NTC and PTC temperature sensors provide continuous winding monitoring to safeguard against overheating. The motor fan draws only 60 VA of auxiliary power, maintaining minimal parasitic losses while stabilising operating temperature. A holding brake is included but is expressly not for main spindle use, promoting safe, conditioned stops in intermittent duty cycles.
Safety and maintenance are simplified through protective earthing at designated points and strict adherence to clean wiring practices to prevent errant drive commands. The motor ships in custom military-grade packaging to guard against transit damage and must not be energized when seals or connectors are open or under pressure. Before commissioning, technicians should confirm correct ground wiring and consult the digital drive controller documentation to ensure compliant, long-term performance.
Design
B05
Power Connection ouput direction
A-Side Connector
Power Connector Position
Top
Winding Type
CS, DS