MCP070C-V300-NI-N0CN-NNNN

The MCP070C-V300-NI-N0CN-NNNN belongs to the MCP Linear Motors series from Bosch Rexroth Indramat. It is an ironless primary section designed to generate direct linear force for positioning tables, gantry stages, and other automation axes that require fast, cog-free motion. As an ironless mover, the product functions in tandem with a magnetic track to translate DC bus energy into thrust without the detent effects associated with iron-core designs, making it well suited for precision processes in semiconductor handling, packaging, and small-part assembly.

The motor is engineered for a nominal DC link of 300 VDC, which sets the voltage range that the drive controller must maintain for correct force production. Thermal management relies on natural convection; heat is dissipated to ambient air without forced airflow or liquid circuits, simplifying cabinet design. Service lines exit on the front face, so a front cable exit helps installers route power and feedback leads along the travel axis without sharp bends. Dimensionally, the mover is classified as Motor Size 070; this code defines the active width and coil stack height used when matching it to tracks and secondary parts. Its overall active length is identified by Frame Length C, giving engineers a reference for calculating continuous force, resistance, and inductance when multiple sections are arrayed in series.

Mechanical integration is based on an I-shape mounting profile, allowing the coil body to bolt to carriages or adapter plates through a central spine while maintaining clearance for the magnet rail. Because the drive is ironless, there is negligible attraction to the track, reducing bearing load and easing manual installation. Classified as an MCP Ironless Linear Motor, the mover carries no special design features, so its performance envelope is defined solely by the standard winding data and the ambient conditions specified for the series.