MHD095A-035

The MHD095A-035 is a three-phase permanent-magnet servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It is intended for closed-loop drive systems where precise torque and position control are required. In industrial automation this unit converts commanded electrical input from a drive controller into mechanical rotation, allowing machines such as gantries, packaging stations, and printing lines to move loads with repeatable accuracy. Its mechanical interface follows standardized dimensions so that builders can swap motors without redesigning mounting plates.

The motor’s centering pilot has a diameter of 130 mm, giving a precise locating surface that keeps the stator concentric to the driven axis. A rectangular mounting ring with a flange of 140 / 150 mm provides standardized bolt patterns, so the unit can fit common gearbox or machine frames. Under thermal equilibrium it can hold a continuous standstill torque of 12.0 Nm, which defines the maximum static load the shaft can support without exceeding rated winding temperature. Electrical behavior is set by winding code 035; this code fixes the motor’s phase resistance and back-EMF slope to match designated drive modules. Compliance with Bosch Rexroth Indramat manufacturing tolerances ensures these values remain consistent across production lots.

Within the MHD Synchronous Motors family, the unit follows the compact envelope associated with length code A, so total housing depth remains manageable in cabinets with limited axial clearance. Its frame is categorized as 095, balancing rotor inertia with the 12 Nm torque rating for moderate acceleration cycles. Classified by the manufacturer as a Servo Motor, it is supplied with feedback and thermal sensors to integrate directly with digital drives. Consistency among the MHD Synchronous Motors series lets machine builders interchange models of different windings or lengths while retaining identical mechanical footprints.