MHD095C-035-PG1-BN
MHD Synchronous Motors
Technical Specifications
Holding Brake
With holding brake
Holding Brake Torque
22.0 Nm
Housing Cooling Type
Liquid cooling
Encoder Type
Digital servo feedback w/ integrated encoder
Type of Position Detection
Absolute (>4096 revolutions)
Continuous Torque at Standstill
23.0 Nm
Motor Length
C
Centering diameter
130 mm
Flange size
140 / 150 mm
Motor Size
095
Shaft Design
Plain shaft
Shaft Seal
Yes
Power Connection Direction
to side B
Power ConnectionType
Output Connector
Product Type
Servo Motor
Winding Code
035
Frequently Asked Questions
Does the Bosch Rexroth Indramat MHD095C-035-PG1-BN motor permit liquid cooling under continuous torque operation?
Yes, liquid cooling regulates thermal dissipation during constant load conditions, maintaining stable torque output and extending motor life without excessive overheating during duty cycles.
Does the Bosch Rexroth Indramat MHD095C-035-PG1-BN motor support CNC machining precision requirements?
Yes, the integrated encoder feedback and stable torque curve enable repeatable positioning, ensuring machining tolerance compliance across extended operation cycles.
What cooling fluid considerations are required for the Bosch Rexroth Indramat MHD095C-035-PG1-BN motor?
The motor’s liquid cooling channels must utilize non-conductive coolants, maintaining viscosity balance and ensuring thermal conductivity without compromising electrical insulation resistance.
How is torque ripple minimized in the Bosch Rexroth Indramat MHD095C-035-PG1-BN motor system?
The integrated servo feedback continuously corrects rotor angle deviations, producing smoother torque delivery while reducing oscillations in sensitive automation environments.
What ensures shaft durability in the Bosch Rexroth Indramat MHD095C-035-PG1-BN motor under load reversals?
The hardened plain shaft resists wear, while the bearing system absorbs axial and radial stresses, extending operational life under frequent directional changes.
Common Misspellings
MHD095C035PG1BN
MHD095C 035 PG1 BN
mhd095c-035-pg1-bn
MHD95C-035-PG1-BN
Internal Product Review
The Bosch Rexroth Indramat MHD095C-035-PG1-BN motor is a comes from the MHD series and is designed for reliable servo applications. It delivers 23.0 Nm continuous torque at standstill, integrates a digital encoder with flange size 140 / 150 mm. It is widely used in automation lines and CNC machining systems requiring exact feedback.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MHD095C-035-PG1-BN.
Exchange
Want to sell your MHD095C-035-PG1-BN?
