MHD112A-024-NG0-AN
MHD Synchronous Motors
The MHD112A-024-NG0-AN from Bosch Rexroth Indramat is a liquid-cooled servo motor housing without holding brake and features a motor size of 112. Part of the MHD Synchronous Motors series, it delivers a continuous torque at standstill of 15.0 Nm, employs a digital servo feedback (HSF) encoder, and uses relative position detection.
It includes a centering diameter of 130 mm, a flange size of 192 mm, and carries a winding code of 024. The servo motor has a plain shaft design with a shaft seal for added protection.
Technical Specifications
Holding Brake
Without holding brake
Housing Cooling Type
Liquid cooling
Encoder Type
Digital servo feedback (HSF)
Type of Position Detection
Relative
Continuous Torque at Standstill
15.0 Nm
Motor Length
A
Centering diameter
130 mm
Flange size
192 mm
Motor Size
112
Shaft Design
Plain shaft
Shaft Seal
Yes
Power Connection Direction
to side A
Power Connection Type
Output Connector
Product Type
Servo Motor
Winding Code
024
Frequently Asked Questions
What method of cooling is used in the Bosch Rexroth Indramat MHD112A-024-NG0-AN motor housing?
The housing integrates liquid cooling channels, enabling enhanced thermal dissipation and continuous operation even under demanding duty cycles with high load.
Where is the power connection directed in the Bosch Rexroth Indramat MHD112A-024-NG0-AN motor assembly?
The power connection is oriented to side A with an output connector, simplifying electrical integration in compact drive cabinet configurations.
What type of position detection is used in the Bosch Rexroth Indramat MHD112A-024-NG0-AN motor design?
The position detection is relative type, allowing synchronization with external reference points during commissioning and after power cycling.
What is the maximum peak current capacity of the Bosch Rexroth Indramat MHD112A-024-NG0-AN motor?
The peak current is rated at 59.0 A, enabling the motor to handle short-term overloads while maintaining mechanical stability under acceleration.
What is the effective voltage constant KE of the Bosch Rexroth Indramat MHD112A-024-NG0-AN motor?
The effective back-EMF voltage constant is 116.4 V per 1000 min-1, enabling predictable voltage feedback during operation at 2000 rpm.
Common Misspellings
MHD112A024NG0AN
MHD112A 024 NG0 AN
mhd112a-024-ng0-an
Internal Product Review
The part code MHD112A-024-NG0-AN is a servo motor from Bosch Rexroth Indramat MHD series. It features a continuous standstill torque of 15 Nm, torque constant of 1.28 Nm/A and peak current handling up to 59 A. This motor is widely applied in conveyors and belts systems as well as in programmable logic controllers industry.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MHD112A-024-NG0-AN.
Exchange
Want to sell your MHD112A-024-NG0-AN?
