MHD112C-024-PP0-BP
MHD Synchronous Motors
Technical Specifications
Holding Brake
Without holding brake
Housing Cooling Type
Natural convection with IP68 Protections
Encoder Type
Digital servo feedback w/ integrated encoder
Type of Position Detection
Absolute (>4096 revolutions)
Continuous Torque at Standstill
38.0 Nm
Motor Length
C
Centering diameter
130 mm
Flange size
192 mm
Motor Size
112
Shaft Design
Keyed Shaft
Shaft Seal
Yes
Power Connection Direction
to side B
Power ConnectionType
Output Connector
Product Type
Servo Motor
Winding Code
024
Frequently Asked Questions
How does the absolute multi-turn encoder in the MHD112C-024-PP0-BP improve commissioning and recovery after power loss?
It preserves position across >4096 revolutions to eliminate homing cycles and reduces start-up sequences after interruptions. It limits fixture collisions and increases throughput consistency on indexing tables and multi-axis gantries.
How does the 38 Nm continuous torque at standstill of MHD112C-024-PP0-BP translate to motion-axis design?
It enables stiff velocity loops with ample margin for static friction and process loads for improving contouring on mid-inertia axes. Its designers can pair moderate gear ratios without sacrificing holding ability during low-speed interpolation.
Why is a keyed shaft with shaft seal advantageous for MHD112C-024-PP0-BP in industrial duty?
The keyway provides positive mechanical drive for pulleys/couplings under cyclic torque for minimizing micro-slip. Its seal limits ingress of coolant and paper/food particulates for sustaining encoder integrity and bearing life in washdown-adjacent environments.
Which Bosch Rexroth drive families are typically used with MHD motors like MHD112C-024-PP0-BP, and why?
The MHD motors are specified to run with Rexroth/Indramat digital intelligent drive controllers (e.g., DDS/DKC generations) for ensuring correct feedback handling and parameter sets. Its matching controller families simplifies startup and preserves safety/diagnostic behavior.
What benefits arise from side-B power connector orientation on MHD112C-024-PP0-BP in tight machine bays?
The routing exits away from guarding or moving members for reducing bend-radius stress and EMI coupling into sensor harnesses. Its panel layouts gain clearance for drip-loops and serviceability without disturbing adjacent axes.
Common Misspellings
MHD112C024PP0BP
MHD112C 024 PP0 BP
mhd112c-024-pp0-bp
Internal Product Review
Bosch Rexroth manufactures the MHD112C-024-PP0-BP servo motor that delivers 38 Nm continuous torque and it includes a digital feedback encoder of greater than 4096-turn for position detection. It has a keyed, sealed shaft, 192 mm flange and 130 mm pilot for simplifying mounting. This unit has a side-B output connector and IP68 housing to suit installation in packaging, printing, machine-tool and materials-handling lines.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MHD112C-024-PP0-BP.
Exchange
Want to sell your MHD112C-024-PP0-BP?
