MHD112C-058-PP3-BN
MHD Synchronous Motors
Technical Specifications
Holding Brake
With holding brake
Holding Brake Torque
70.0 Nm
Housing Cooling Type
Liquid cooling
Encoder Type
Digital servo feedback w/ integrated encoder
Type of Position Detection
Absolute (>4096 revolutions)
Continuous Torque at Standstill
38.0 Nm
Motor Length
C
Centering diameter
130 mm
Flange size
192 mm
Motor Size
112
Shaft Design
Keyed Shaft
Shaft Seal
Yes
Power Connection Direction
to side B
Power ConnectionType
Output Connector
Product Type
Servo Motor
Winding Code
058
Frequently Asked Questions
What advantages does the digital servo feedback with multiturn absolute detection provide in commissioning and safety? (MHD112C-058-PP3-BN)
The integrated multiturn encoder supplies absolute position over >4096 revolutions for eliminating homing moves after power cycles. Its drive controllers read motor/loop data instantly for shortening commissioning while improving safe stop/hold behavior when combined with the holding brake.
Why is the 70 Nm holding brake significant for vertical axes and emergency stops on MHD112C-058-PP3-BN?
The brake torque secures suspended loads and resists back-driving during power loss or E-stop for protecting mechanics and workpieces. Its on lift, gantry and spindle-orient axes it keeps position until torque-producing current is re-established.
How do the mechanical interfaces (192 mm flange, 130 mm pilot) simplify retrofit of MHD112C-058-PP3-BN into legacy frames?
Its standardized mounting, 192 mm square flange with 130 mm centering helps align to existing gearboxes and machine plates without adapter rings. Its reduces alignment runout for improving coupling life and minimizing install time.
How does the keyed, sealed shaft and side-B power connector on MHD112C-058-PP3-BN impact integration and reliability?
The keyed shafts provide positive torque transmission and repeatable phase alignment to couplings, while the seal limits ingress at the journal. Its side-B power orientation eases cable routing in cabinets located behind the motor.
How does absolute feedback (>4096 rev) on MHD112C-058-PP3-BN reduce cycle time in multi-shift manufacturing?
The no-home startup means machines resume coordinated motion immediately after power-on for removing non-productive homing strokes. It compounds into measurable throughput gains, especially on synchronized webs and pallet transfer lines.
Common Misspellings
MHD112C058PP3BN
MHD112C 058 PP3 BN
mhd112c-058-pp3-bn
Internal Product Review
The Indramat’s MHD112C-058-PP3-BN servo motor combines liquid-cooled housing, digital servo feedback with multiturn absolute detection and a 70 Nm brake. It sustains 38 Nm torque at standstill and reaches 4500 rpm with a keyed, sealed shaft. This motor provides side-B power connector to flexible cable routing in applications like machine tools, packaging, textile automation and transfer systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MHD112C-058-PP3-BN.
Exchange
Want to sell your MHD112C-058-PP3-BN?
