MHD115C-024-NG0-BN

The MHD115C-024-NG0-BN is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Within an automation cell, it mounts to a machine frame and links to a drive controller to deliver commanded motion profiles, providing closed-loop rotary positioning for tooling, transfer, or handling axes.

Mechanical alignment is aided by a centering diameter of 180 mm, and the motor can sustain a standstill torque of 70.0 Nm without overheating. Rotor position feedback is generated by a Digital servo feedback (HSF) encoder, which supplies high-speed incremental data for the drive’s control loops. A flange dimension of 192 mm matches industry mounting interfaces, while the stator jacket supports Liquid cooling to remove losses directly at the winding surface and keep thermal drift low during continuous operation.

The unit belongs to the size code 115 and is built in the C length class, balancing torque density against installation depth. Power leads exit toward side B through an output connector to simplify cable routing and reduce bending stress. A Plain shaft transmits torque without keyways for applications that rely on shrink-fit or clamping hubs, and there is a shaft seal to limit ingress of coolant or lubricants. Position is tracked on a relative basis, so an external homing routine is needed after power-up. Stator windings follow code 024, defining resistance and inductance values that pair with the recommended Indramat inverter. Together, these characteristics enable precise, repeatable motion in machines that demand high continuous torque and accurate feedback without a holding brake.