R911282862 (MHD112C-024-PG3-BN)

How does the multiturn absolute encoder in MHD112C-024-PG3-BN improve commissioning and recovery after outages?

It preserves absolute position over >4096 revolutions, so homing routines are unnecessary after power interruptions. It speeds restarts and reduces wear on reference switches while maintaining closed-loop accuracy for coordinated axes.

Why is liquid cooling used on this MHD112C-024-PG3-BN instead of only surface/air cooling?

The liquid cooling increases continuous torque density and stabilizes winding temperatures during cyclic duty. It also lowers audible noise and allows compact enclosures where airflow is restricted or contaminated.

What role does the 38 Nm continuous torque at standstill play in high-inertia motion sets?

The continuous stall torque defines the sustained holding and low-speed process torque without overheating. Its appropriate drive limits supports rapid start–stop indexing and tensioning without drifting under static mechanical load.

How does side-B power connection on MHD112C-024-PG3-BN affect cabinet and cable routing?

Its side-B orientation allows tighter machine envelopes and separation from feedback cabling to reduce EMC coupling. It simplifies dress packs on gantries or robots where bend radius and service loops are constrained.

How do the 192 mm flange and 130 mm centering pilot influence mechanical rigidity on MHD112C-024-PG3-BN?

The flange/pilot geometry ensures precise concentricity and stiffness at the drivetrain interface for minimizing runout and vibration. It improves servo bandwidth and reduces contour error in multi-axis interpolation.

MHD112C024PG3BN

MHD112C 024 PG3 BN

mhd112c-024-pg3-bn

The Bosch Rexroth Indramat’s AC motor MHD112C-024-PG3-BN maintains thermal stability through its liquid-cooled housing design and it comes in a C-length 112 frame. It includes a plain sealed shaft and possesses a multiturn absolute feed back encoder for position detection. This motor is accompanied by a holding brake that offers 70 Nm of torque and at standstill its torque value is specified as 38 Nm to perform operations in robotics and metal-forming lines where precise multi revolution positioning and thermal stability is required.