R911287749 (MHD112C-024-PG3-RN)
MHD Synchronous Motors
Technical Specifications
Product Type
Synchronous Motor
Motor Design
Brushless
Commutation Type
Electronic
Operational Noise
Low
Ambient Operating Temperature
0 to 40 Degrees Celsius
Storage Temperature
Up to 80 Degrees Celsius
Permanent Magnet Material
Special Materials
Control Panel Integration
Direct
Protection Type
Durable Housing Unit
Servo System Compatibility
Yes
Start-Stop Operations
Continuous at High Repeat Frequency
Inertial Mass
Low
Manual Handling Requirements
Yes.
Frequently Asked Questions
What positioning feedback does the MHD112C-024-PG3-RN provide, and how does it aid multi-axis synchronization?
It uses digital servo feedback with a multiturn absolute encoder for tracking over 4096 revolutions to preserve position through power cycles. It enables deterministic homing and tighter electronic gearing in coordinated packaging or printing lines.
What role does the 70 Nm holding brake play on the MHD112C-024-PG3-RN in vertical axes or safety-related stops?
The integrated brake supplies static torque to hold loads when power is removed for preventing drift on Z-axes or elevators. It complements drive-based STO functions by mechanically securing position during E-stops.
How does liquid cooling on MHD112C-024-PG3-RN influence continuous torque delivery and enclosure design?
The liquid cooling removes heat directly from the stator for enabling higher continuous torque at standstill (38 Nm) without enlarging the frame. It also helps maintain sealed housings in washdown or dusty conversion machinery.
How do the 130 mm centering diameter and 192 mm flange simplify mechanical interchange for brownfield upgrades?
These standardized MHD112C mounting interfaces allow adapter-plate-free swaps on many legacy machine tools and packaging stations. Its plain shaft with seal eases coupling alignment while maintaining ingress protection.
What wiring orientation and connector style are used on many MHD112C-024 variants, and how does that aid panel layout?
It uses a right-oriented power connector that routes cabling away from guard doors and coolant manifolds. It reduces bend-radius conflicts and eases service access.
Common Misspellings
MHD112C024PG3RN
MHD112C 024 PG3 RN
mhd112c-024-pg3-rn
Internal Product Review
The Bosch Rexroth Indramat’s MHD112C-024-PG3-RN servo motor is designed with a 130 mm centering and plain shaft orientation. It has a built-in A 70 Nm holding brake and it delivers 38 Nm of continuous standstill torque to aid controlled stops and steady feed axes. This motor possesses a right-side located power connector for simplifying integration in packaging, printing and machine-tool retrofits.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MHD112C-024-PG3-RN.
Exchange
Want to sell your MHD112C-024-PG3-RN?
