R911294980 (MHD115A-058-PG0-AA)
MHD Synchronous Motors
Technical Specifications
Overload Protection
Yes
Maximum Torque
110Nm
Holding Brake
No
Cabling
Yes, various designs
Hardware Modification
Not allowed
Approved Spare Parts and Accessories Use
Yes
Temperature Variation Resistance
No
Ground Wire Connection Check
Required before power is ON
Touching Electrical Connection Points
Prohibit when power is on
Power Connector Output Direction
A side
Winding Inductivity
2.88mH
Output Shaft
Plain
Time Constant
60 minutes (with natural convection cooling mode)
Maximum Setup Height
1000m above sea level
Torque to Inertia Mass Ratio
High Dynamics
Motor Bearing Service Life
30,000 operating hours (as per ISO 281)
Axial And Radial Load Limits
Must be within specified limit
Shipping
Done through reputed carriers.
Frequently Asked Questions
What impact does natural convection cooling have on the motor’s installation environment?
The cooling method limits placement to areas with adequate airflow and ambient temperature control. The absence of forced ventilation reduces dust intake but may require spacing for heat dissipation.
How does a plain shaft affect mechanical coupling in servo motor applications?
The design allows direct connection to couplings or pulleys with low friction losses. The ensures smooth torque transfer but demands precise alignment during installation.
Why is absolute position detection over multiple revolutions important for servo accuracy?
The provides consistent reference even after power loss or movement interruption. The enhances repeatability and reduces homing time in automated processes.
What considerations are needed when mounting a motor with a 192 mm flange and 180 mm centering diameter?
The requires compatible mounting surfaces and precise machining for concentric alignment. The prevents mechanical stress and ensures balanced load distribution.
How does the digital servo feedback interface improve motion control precision?
The enables real time communication between the drive and the motor encoder. The results in faster correction cycles and smoother dynamic response.
Common Misspellings
MHD115A058PG0AA
MHD115A 058 PG0 AA
mhd115a-058-pg0-aa
Internal Product Review
The Rexroth Indramat MHD115A-058-PG0-AA servo motor operates with natural convection cooling and a plain shaft for smooth torque transmission. It is ideal for printing systems, automated inspection setups and continuous production drives demanding long-cycle accuracy featuring absolute position feedback exceeding 4096 revolutions
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MHD115A-058-PG0-AA.
Exchange
Want to sell your MHD115A-058-PG0-AA?
