R911310082 (MHD112C-035-NP0-LN)

The winding code 035 maps to a 3000 min⁻¹ characteristic speed, 38 Nm standstill torque (natural cooling) and 1.37 Nm/A torque constant for guiding drive current and dc-bus requirements. Its rated speed is 2500 rpm with 167 Hz rated frequency for sizing filters and mechanics.

The HSF provides high-resolution incremental signals for precise velocity and position loops with low latency. It’s relative axis requires a homing/reference move after power-down to establish absolute position.

Its liquid-cooled housings in the MHD series remove heat efficiently to enabling higher continuous output and temperature stability under sustained load compared with natural convection. Its coolant-ready variants are documented across the family.

The IP65 protects against dust ingress and low-pressure water jets, supporting use near coolants or airborne particulates typical of packaging lines and machining cells. It still requires appropriate cable glands and sealed connectors to maintain the rating.

The size-112 frame standardizes a 192 mm flange and 130 mm centering diameter for drop-in interchangeability across MHD112 variants. It eases retrofits and ensures concentricity for precision couplings and gearheads.