MKD041B-144-GP0-KN-SA001
MKD Synchronous Motors
The Bosch Rexroth Indramat MKD041B-144-GP0-KN-SA001 is a precision servo motor in the MKD Synchronous Motors series delivering 2.7 Nm continuous torque and 24.8 Nm peak at 320 V, 12.1 A. It employs resolver feedback, a shaft with keyway, an 82 mm flange, supports 9000 RPM, and connects via a connection box.
Technical Specifications
Shaft Design
Shaft with keyway
Shaft Seal
Yes
Holding Brake
Without holding brake
Other Designs
None
Encoder Type
Resolver feedback (RSF)
Position Detection
Relative
Continuous Torque at Standstill
2.7 Nm
Motor Length
B
Centering diameter
50 mm
Flange size
82 mm
Connection Type
Connection box
Product type
Servo Motor
Winding Code
144
Rated Voltage
320 V
Rated Current
12.1 A
Peak Torque
24.8 Nm
Maximum Speed
9000 RPM
Rotor Inertia
0.0012 kgm²
Frequently Asked Questions
What peak torque capacity supports acceleration in MKD041B-144-GP0-KN-SA001?
It achieves 24.8 Nm peak torque, offering sufficient margin to handle rapid indexing or short bursts caused by payload variation and frictional changes.
What supply voltage should be considered during planning in MKD041B-144-GP0-KN-SA001?
By matching a rated voltage of 320 V, the motor ensures compatibility with diverse industrial drive systems, providing consistent performance and reliability across mixed-vendor automation platforms.
Which current figure is critical for conductor and protection sizing in MKD041B-144-GP0-KN-SA001?
The rated current is 12.1 A. This value guides fuse and cable selection, ensuring continuous service without overheating or nuisance interruptions in dense panels.
What is the maximum supported speed in MKD041B-144-GP0-KN-SA001?
The motor operates up to 9000 RPM, enabling aggressive cycle times while maintaining thermal reliability under continuous production conditions.
Which flange interface simplifies gearbox integration in MKD041B-144-GP0-KN-SA001?
It has a 130 mm centering diameter. This concentric surface aligns connected hardware accurately, reducing vibration and extending bearing life through better load distribution.
Common Misspellings
MKD 041B-144-GP0-KN-SA001
MKD-041B-144-GP0-KN-SA001
MKD041B-144-GP0-KN/SA001
MKD041B144GP0KNSA001
MKDO41B-144-GPO-KN-SAOO1
MKD041B 144 GP0 KN SA001
mkd041b-144-gp0-kn-sa001
MKD41B-144-GP0-KN-SA001
Internal Product Review
The MKD041B-144-GP0-KN-SA001 has been designed to have a repeatable performance in miniaturized systems. It has a structured connection box which provides very orderly cable managemen. The electrical and mechanical standards allow the consistent commissioning, dependable alignment and stable service in high throughput production facilities.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MKD041B-144-GP0-KN-SA001.
Want to 
