MKD071B-061-KP0-KS
MKD Synchronous Motors
The Bosch Rexroth Indramat MKD071B-061-KP0-KS from the MKD Synchronous Motors series is a high-performance Servo Motor featuring a shaft with keyway and integrated shaft seal for robust operation. It delivers a continuous torque at standstill of 8.0 Nm and a peak torque of 11.1 Nm, operating at a rated voltage of 325 V and rated current of 5.4 A with a maximum speed of 6000 rpm. The motor uses resolver feedback w/ integrated encoder and offers absolute position detection (>4096 revs). Designed without holding brake, it employs an IP65 protection type enclosure and insulation class F (155°C). Housed in a connection box, this motor size 071 unit with motor length B and winding code 061 provides reliable performance in demanding industrial environments.
Technical Specifications
Shaft Design
Shaft with keyway
Shaft Seal
Yes
Holding Brake
Without holding brake
Encoder Type
Resolver feedback w/ integrated encoder
Position Detection
Absolute (>4096 revs)
Continuous Torque at Standstill
8.0 Nm
Motor Length
B
Motor Size
071
Connection Type
Connection box
Product type
Servo Motor
Winding Code
061
Peak Torque (nm)
11.1
Insulation Class
F (155°C)
Rated Current (a)
5.4
Maximum Speed (rpm)
6000
Rated Voltage (v)
325
Protection Type
IP65
Frequently Asked Questions
How should supply protection be sized in MKD071B-061-KP0-KS?
Rated at 5.4 A, the current provides a dependable baseline for conductor choice and protective coordination under varying load conditions.
What speed boundary anchors cycle-time modeling in MKD071B-061-KP0-KS?
The module utilizes employs 6000 rpm maximum enables high indexing rates while preserving thermal margin, so machines run smoothly during stops and starts.
How does environmental sealing affect siting in MKD071B-061-KP0-KS?
The motor provides ip65 sealing protects bearings and resolver hardware near washdowns or particulates, so work stays steady without extra parts.
Which insulation classification supports longevity in MKD071B-061-KP0-KS?
The model utilizes class F (155 °C) insulation preserves dielectric strength across long intervals, to keep noise down when loads change.
What stall capability stabilizes dwell conditions in MKD071B-061-KP0-KS?
It mounts via a 192 mm flange size. The broader face spreads stresses, maintaining angular stability and preventing fretting at the interface when torque direction changes frequently.
Common Misspellings
MKD 071B-061-KP0-KS
MKD-071B-061-KP0-KS
MKD071B061KP0KS
MKDO71B-O61-KPO-KS
MKD071B 061 KP0 KS
mkd071b-061-kp0-ks
MKD71B-061-KP0-KS
Internal Product Review
The MKD071B-061-KP0-KS combines resolver feedback with an integrated encoder for precise absolute detection over 4096 revolutions. Its reliable position tracking reduces downtime and improves system stability. With strong continuous torque at standstill, it suits demanding motion tasks where consistent performance and dependable alignment are critical for long production runs.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MKD071B-061-KP0-KS.
Exchange
Want to sell your MKD071B-061-KP0-KS?
