MKD090B-035-KP2-KN

The MKD090B-035-KP2-KN servo motor is produced by Bosch Rexroth Indramat within the MKD Synchronous Motors series. It supplies programmable rotary power to conveyors, pick-and-place units, and forming equipment, allowing the attached drive controller to manage position, velocity, and torque in real time. Its electromechanical construction is optimized for duty cycles that demand rapid acceleration and repeatable stopping points across multiple shifts.

A centering diameter of 110 mm aligns the housing concentrically to the machine frame, while a flange dimension of 140 mm sets the bolt circle for rigid mounting. The motor can sustain a continuous standstill torque of 12.0 Nm, allowing it to hold loads without exceeding thermal limits. All electrical terminations are routed on Side B through a sealed Connection box, which simplifies cable entry and keeps encoder and power conductors separated from moving parts. These mechanical and wiring attributes give installers predictable clearances and facilitate quick swap-outs during maintenance windows. Together, these ratings allow the motor to maintain accuracy during extended dwell periods and high-frequency indexing routines.

Rotor state is monitored by a Resolver feedback with integrated encoder, and the control loop benefits from Absolute (>4096 revs) position detection that eliminates homing at power-up. A Shaft with keyway transmits torque to couplings while the shaft seal prevents lubricant escape and particle ingress. The B length code combines with the 090 frame size to keep the mass low without reducing thermal surface. Internal characteristics follow Winding Code 035, providing electrical parameters that match standard Indramat drive ratings.