MKD090B-047-GP0-KN-SA001
MKD Synchronous Motors
The Bosch Rexroth Indramat MKD090B-047-GP0-KN-SA001 servo motor from the MKD Synchronous Motors series features resolver feedback (RSF) for relative position detection, delivers 12.0 Nm continuous torque at standstill, draws 10.8 A, and has a voltage constant of 59.6 V/krpm. With a 140 mm flange, shaft with keyway, and IP65 protection, it ensures reliable performance.
Technical Specifications
Shaft Design
Shaft with keyway
Shaft Seal
Yes
Holding Brake
Without holding brake
Other Designs
None
Encoder Type
Resolver feedback (RSF)
Position Detection
Relative
Continuous Torque at Standstill
12.0 Nm
Motor Length
B
Flange size
140 mm
Centering diameter
110 mm
Connection Direction
Side B
Product type
Servo Motor
Winding Code
047
Rated Current
10.8 A
Voltage Constant
59.6 V/krpm
Storage Temperature Range
-20 to 80 °C
Rotor Inertia
44.0 kg*cm²
Protection Class
IP65
Frequently Asked Questions
Which current rating supports drive pairing in MKD090B-047-GP0-KN-SA001?
Electrical setup is guided by a rated current of 10.8 A, informing conductor selection and ensuring accurate thermal modeling during integration with protective systems.
Which face interface accelerates reducer alignment in MKD090B-047-GP0-KN-SA001?
Installation efficiency improves with a 140 mm flange dimension, which reduces dependency on adapter hardware and shortens mechanical setup procedures across varied industrial platforms.
What pilot diameter supports concentric assembly in MKD090B-047-GP0-KN-SA001?
The motor gives with 110 mm centering diameter improves runout and reduces vibration, so heat stays low in tough places.
What storage window assists logistics in MKD090B-047-GP0-KN-SA001?
This motor gives −20 to +80 °C storage temperature range eases warehousing in varied climates, so work stays steady when loads change.
Which inertia metric informs tuning in MKD090B-047-GP0-KN-SA001?
Without a holding brake, system mass and inertia are reduced. Applications not requiring power-off retention benefit from quicker response and simplified mechanical integration.
Common Misspellings
MKD 090B-047-GP0-KN-SA001
MKD-090B-047-GP0-KN-SA001
MKD090B-047-GP0-KN/SA001
MKD090B047GP0KNSA001
MKDO9OB-O47-GPO-KN-SAOO1
MKD090B 047 GP0 KN SA001
mkd090b-047-gp0-kn-sa001
MKD90B-047-GP0-KN-SA001
Internal Product Review
Bosch Rexroth's MKD090B-047-GP0-KN-SA001 brings keyed-hub simplicity and resilient sealing to repetitive motion cells. Its shaft with keyway specification ensures confident torque transfer through reversals.This maintains reliable positioning accuracy and frequent product changeovers.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MKD090B-047-GP0-KN-SA001.
Want to 
