MKD112C-024-GP0-BN
MKD Synchronous Motors
Rated 4 stars (5 total reviews)
The MKD112C-024-GP0-BN is a servo motor manufactured by Bosch Rexroth Indramat as part of the MKD Synchronous Motors series. It supplies commanded torque and speed to automated conveyors, packaging stations, and metal-cutting spindles where closed-loop motion is required. When paired with a compatible drive controller, the motor supports coordinated axis control and repeatable positioning within compact mechanical envelopes.
The motor sustains a continuous standstill torque of 38.0 Nm, allowing it to hold static loads without overheating when the axis is clamped in position. A centering diameter of 130 mm aligns its frame concentrically with the mounting pilot on the machine, while the 192 mm square flange provides the bolt circle for secure attachment. Position data is returned through Resolver feedback, delivering analog sine-cosine signals to the drive for high-resolution commutation. Power and encoder leads exit on side B by means of an output connector, simplifying cable loops in tight cabinets. Environmental sealing to IP65 blocks dust ingress and low-pressure water jets, and an integral shaft seal supplements the housing gasket. The model is supplied without a holding brake for applications that use external clamping or active drive torque to maintain rest positions.
Dynamic accuracy is reinforced by a system precision of ±8 angular minutes, enabling consistent angular repeatability after each move. Thermal insulation rated to Class F permits winding temperatures up to 155 °C, so the motor can operate continuously at ambient temperatures from 0–40 °C without derating. The motor has a shaft with keyway that transmits torque through couplings or pulleys, and its dedicated seal retains grease and shields the bearing set. Internally, winding code 024 and length code C coordinate electrical constants with the drive so commanded currents match magnetic flux.
Technical Specifications
Centering diameter
130 mm
Connection Direction
Side B
Connection Type
Output connector
Continuous Torque at Standstill
38.0 Nm
Encoder Type
Resolver feedback (RSF)
Flange size
192 mm
Holding Brake
Without holding brake
Insulation class
F
Motor Length
C
Motor Size
112
Permissible ambient temperature
0-40°C
Position Detection
Relative
Product type
Servo Motor
Protection category
IP65
Shaft Design
Shaft with keyway
Shaft Seal
Yes
System precision
±8 angular minutes
Winding Code
024
Frequently Asked Questions
Common Misspellings
Internal Product Review
The MKD112C-024-GP0-BN is a Bosch Rexroth Indramat servo motor with resolver feedback and IP65 protection. Continuous standstill torque of 38.0 Nm and system precision of ±8 angular minutes support stable, accurate axis performance in demanding motion applications. A strong choice for machine builders seeking dependable servo performance and straightforward integration.
Fax: 1-919-867-6204
Shipping & Payment Options
Warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the MKD112C-024-GP0-BN. Exchange
Want to sell your MKD112C-024-GP0-BN?
