MKD112C-024-GP0-LN

MKD Synchronous Motors

Rated 4.9 stars (6 total reviews)

In Stock, Ships Today

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

5 Minutes 39 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

MKD112C-024-GP0-LN is a servo motor manufactured by Bosch Rexroth Indramat. Part of the MKD Synchronous Motors, it delivers 24 Nm rated torque and 11.7 kW rated power. The motor provides 38.0 Nm continuous torque at standstill and uses resolver feedback encoder. It features a 192 mm flange and relative position detection.

Technical Specifications

Shaft Design
Shaft with keyway

Shaft Seal
Yes

Holding Brake
Without holding brake

Other Designs
None

Encoder Type
Resolver feedback (RSF)

Position Detection
Relative

Continuous Torque at Standstill
38.0 Nm

Motor Length
C

Flange size
192 mm

Centering diameter
130 mm

Connection Type
Power connector

Product type
Servo Motor

Winding Code
024

Rated Power
11.7 kW

Inertia
0.014 kgm^2

Rated Current
27.7 A

Rated Speed
5000 RPM

Rated Torque
24 Nm

Frequently Asked Questions

Why are the 192 mm flange and Ø130 mm centering diameter on MKD112C-024-GP0-LN advantageous for stiffness and coaxiality in precision mounts?

The larger pilot distributes radial load and constrains runout for reducing coupling misalignment forces and bearing preload in high-speed duty. It improves repeatable installation geometry when swapping motors on precision tool spindles or converting packaging axes.

What are the control-loop consequences of the 0.014 kg·m² rotor inertia when MKD112C-024-GP0-LN is coupled to a low-inertia web feed or pick-and-place axis?

Its low reflected inertia ratios of <3:1 allow higher velocity-loop bandwidth without exciting torsional modes that enables aggressive jerk-limited profiles.

How is the 38.0 Nm continuous torque at standstill used on MKD112C-024-GP0-LN despite the absence of a holding brake?

The drive commands DC torque via current regulation to counter static loads; thermal models must keep copper and magnet temperatures within limits. For vertical axes, pair with a spring-applied, electrically released machine-side brake for fail-safe parking.

How do the 27.7 A rated current and 11.7 kW rating of MKD112C-024-GP0-LN shape drive sizing and cabling?

The controller with resolver interface whose continuous current exceeds 27.7 A with headroom for overload; conductor cross-section and connector thermal rating must match expected RMS current. It is to also verify DC-link voltage and back-EMF margin at 5,000 RPM operating points.

What ingress protection is typical for MKD112C geometry with a shaft seal, and how should designers confirm IP compliance?

The MKD112C variants achieve IP65 when equipped with a shaft seal and appropriate connectors; verify against the exact code and nameplate. Confirm sealing compatibility with washdown or oil-mist exposure if applicable to the process.

Common Misspellings

Internal Product Review

The Rexroth Indramat’s MKD112C-024-GP0-LN servo motor integrates a 192 mm flange and it comes with a sealed keyed shaft. It relies on RSF resolver for relative position feedback. This unit is rated for 11.7 kW and offers 38 Nm torque at standstill. It is designed for 5000 RPM and draws 27.7 A, while it is widely usedacross machine tools, packaging lines and printing systems.