MKD112C-058-GG0-AN
MKD Synchronous Motors
The Bosch Rexroth Indramat MKD112C-058-GG0-AN is a high-performance Servo Motor from the MKD Synchronous Motors series. It delivers 9.3 kW power output at a rated speed of 3000 RPM and provides a rated torque of 60 Nm with a continuous standstill torque of 38.0 Nm. The motor features a plain shaft with shaft seal, a centering diameter of 130 mm and a flange size of 192 mm. Weighing 58 kg and rated IP65 for protection, it utilizes resolver feedback (RSF) encoder for relative position detection. This design comes without holding brake, with winding code 058 and an output connector connection type, offering robust, precise performance for demanding applications.
Technical Specifications
Shaft Design
Plain shaft
Shaft Seal
Yes
Holding Brake
Without holding brake
Other Designs
None
Encoder Type
Resolver feedback (RSF)
Position Detection
Relative
Continuous Torque at Standstill
38.0 Nm
Motor Length
C
Centering diameter
130 mm
Flange size
192 mm
Connection Type
Output connector
Product type
Servo Motor
Winding Code
058
Power Output
9.3 kW
Rated Torque
60 Nm
Protection Class
IP65
Weight
58 kg
Rated Speed
3000 RPM
Frequently Asked Questions
Why is the G–plain shaft with shaft seal on MKD112C-058-GG0-AN advantageous for contaminated or spray-down environments?
The sealed plain shaft limits ingress at the drive end and supports compliant, backlash-managed couplings. It allows use under water-jet cleaning and dusty conditions when installed with proper gaskets and connectors.
How should the 60 Nm rated torque and 38 Nm continuous standstill torque of MKD112C-058-GG0-AN be applied in duty-cycle calculations?
The 60 Nm for continuous-at-speed operation at the rated point, while thermal limits govern peak envelopes. Its 38 Nm standstill value defines sustained holding or indexing capability without motion for informing dwell segments in cyclic profiles.
Which Rexroth drives are sanctioned for MKD112C-058-GG0-AN, and what interface considerations follow?
The Rexroth specifies DIAX04, ECODRIVE, DURADRIVE and INDRADRIVE controllers for MKD motors, with SERCOS/analog interfaces per drive generation. Its controller-specific parameterization and cabling rules.
How do the 130 mm centering diameter and 192 mm flange of MKD112C-058-GG0-AN assist in alignment, stiffness, and interchangeability?
These standardized faces locate the motor concentrically to improve coupling alignment and bolted joint rigidity while easing replacement across 112-frame variants. Its dimensional commonality simplifies machine retrofits and reduces new-fixture engineering effort.
What resolver cabling and grounding practices should be followed to minimize noise susceptibility when integrating MKD112C-058-GG0-AN?
The Rexroth-specified hybrid cables maintain continuous shields and bond grounds both via the motor cable and a separate protective conductor as prescribed. Its connector mate/de-mate under power that follows controller firmware commissioning procedures.
Common Misspellings
MKD 112C-058-GG0-AN
MKD-112C-058-GG0-AN
MKD112C-O58-GGO-AN
MKD112C058GG0AN
MKD112C 058 GG0 AN
mkd112c-058-gg0-an
Internal Product Review
The MKD112C-058-GG0-AN motor from Bosch consumes 9.3 kW of rated power and operats at a nominal a speed of 3000 rpm. It features 60 Nm of rated torque and possess RSF resolver feedback. This unit comes with a sealed plain shaft, IP65 enclosure and 192 mm flange to suit machine tools, packaging lines and printing machinery. It has no holding brake and its output-connector terminations streamline cabinet integration.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MKD112C-058-GG0-AN.
Exchange
Want to sell your MKD112C-058-GG0-AN?
