R911260845 (MKD041B-144-GG0-KN)
MKD Synchronous Motors
Technical Specifications
Cooling Method
Natural and Surface
Over-Temperature in Surface Cooling
60K/100
Over-Temperature in Natural Cooling
60K-100K
Constant Torque (Stationary, Natural Cooling)
2.7-2.9 Nm
Constant Current (Stationary, Natural Cooling)
7.5-8.2A
Characteristic Speed (Stationary, Natural Cooling)
6000 min-1
Peak Current
34.0A
Winding Inductance (20°C, Natural Cooling)
5Mh
Winding Resistance (20°C, Natural Cooling)
1.8 Ohms
Voltage Constant (20°C, Natural Cooling)
36.3 V/1000min-1
Rated Power (Natural Cooling)
0.52-0.88 KW
Rated Torque (Natural Cooling)
1.4-1.5Nm
Rated Voltage (Natural Cooling)
115V -170 V
Rated Speed (Natural Cooling)
3000 to 4500 min-1
Rated Currency
2.8A to 3A
Rated Frequency
150 to 225HZ.
Frequently Asked Questions
Which constant helps speed-voltage estimates on MKD041B-144-GG0-KN?
The MKD041B-144-GG0-KN lists a voltage constant of 36.3 V/1000min⁻¹. This figure supports controller scaling and back-EMF expectations during design and troubleshooting.
What instantaneous capacity informs protection selection for MKD041B-144-GG0-KN?
The MKD041B-144-GG0-KN specifies a peak current of 34 A. This value helps choose protective devices and cable gauges that handle brief surges without nuisance trips.
Which centering feature assists alignment on MKD041B-144-GG0-KN?
The MKD041B-144-GG0-KN provides a 50 mm centering diameter. This geometry improves concentric mounting, reducing vibration and extending bearing life.
What is the stall capability for MKD041B-144-GG0-KN?
The MKD041B-144-GG0-KN delivers 2.7 Nm continuous torque at standstill. This capacity supports stable holding during dwell, tensioning or metrology steps.
How does face geometry standardize mounting on MKD041B-144-GG0-KN?
An output connector provides standardized termination. This interface streamlines installation and service.
Common Misspellings
MKD 041B-144-GG0-KN
MKD-041B-144-GG0-KN
MKD041B144GG0KN
MKDO41B-144-GGO-KN
MKD041B 144 GG0 KN
mkd041b-144-gg0-kn
MKD41B-144-GG0-KN
Internal Product Review
The MKD041B-144-GG0-KN promotes consistent commissioning and straightforward service. Its connection box specification supports orderly terminations and strain relief. The face size and centering geometry assist quick gearbox pairing hence minimizing alignment time and improving repeatability across similar machine families.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MKD041B-144-GG0-KN.
Exchange
Want to sell your MKD041B-144-GG0-KN?
