R911282422 (MKD112C-024-GP0-AN)

Why does MKD112C-024-GP0-AN use resolver (RSF) feedback and what does relative position detection mean for homing and power-cycle behavior?

The RSF provides rugged sinusoidal position sensing suited to servo control. Its position is relative rather than absolute, after power loss the drive must re-reference (home) to establish absolute machine coordinates.

How do the 38 Nm standstill torque and 2000 min⁻¹ characteristic speed of MKD112C-024-GP0-AN map to rated power under different thermal classes?

The MKD112C-024 data sheet lists 5.2 kW (natural 60 K), 11.1 kW (natural 100 K) and 14.1 kW (surface-cooled) at 2500 min⁻¹ rated speed. Its thermal class and cooling mode raise allowable current to enable higher continuous output.

What mechanical implications arise from the 112 frame with 192 mm flange on MKD112C-024-GP0-AN regarding interchangeability and radial loads?

The frame 112 standardizes a 192 mm square flange and 130 mm pilot diameter for drop-in interchange within the family. Its radial-load capability and limits depend on shaft style and overhung distance.

How do the shaft sealing ring and DIN 6885-1 keyway on MKD112C-024-GP0-AN affect ingress protection, lubrication needs, and seal heating?

Its outputs use radial shaft sealing rings (DIN 3760 design A); these rubbing seals require proper lubrication and cleanliness to minimize wear and frictional heating. Its keyway/shaft seal pairing supports reliable torque transmission while guarding contaminants.

What does each element of the MKD112C-024-GP0-AN type code imply for feedback, shaft interface, brake option, and connector orientation?

The “112C-024” denotes the frame/length and winding; “G” = resolver feedback (RSF), “P” = shaft with DIN 6885-1 keyway, “0” = without holding brake, “A” = power connector to side A, “N” = no special design. These encode mechanical/electrical interfaces for integration.

MKD 112C-024-GP0-AN

MKD-112C-024-GP0-AN

MKD112C-O24-GPO-AN

MKD112C024GP0AN

MKD112C 024 GP0 AN

mkd112c-024-gp0-an

Bosch Rexroth produces MKD112C-024-GP0-AN as a synchronous servo motor that combines RSF resolver feedback with a keyway shaft. It possesses sealing ring for dependable torque transfer and delivers 38 Nm standstill torque. This unit uses natural-convection cooling and it is typically deployed in span machine tools, printing, packaging and handling automation. Its standardized power/feedback connectors simplify installation and service.