R911298886 (MKD112C-024-KP0-RN)

MKD Synchronous Motors

Rated 4.5 stars (10 total reviews)

In Stock, Ships Today

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

6 Minutes 15 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth R911298886 (MKD112C-024-KP0-RN) is a synchronous servo motor featuring a fully enclosed design with IP65 protection, suitable for operation in demanding industrial environments. The unit provides motor temperature monitoring for overload protection and may require external sensors and actuators for full regulation and control. It is specified for approved applications and not intended for underwater use; national EMC standards must be observed. The shaft includes a keyway and seal, and this model does not have a holding brake. It uses resolver feedback with integrated encoder allowing absolute position detection exceeding 4096 revolutions. The device operates with a continuous standstill torque of 38.0 Nm, max torque of 148 Nm, and supports a rated torque of 22.0 Nm. The maximum current is 20.9 A at a supply voltage of 380-480 V. Motor insulation is rated to Class F per DIN VDE 0530 Part 1. Mounting must follow manufacturer's guidelines, and adequate cooling time is required after use due to thermal expansion at 100K operation.

Technical Specifications

Design
Completely closed

Degree of Protection
IP 65

Features
Overload protection, Motor temperature-monitoring

Possible additional connections
Extra sensors and actuators

Leakage Current
More than 3.5mA

Dangerous Movements
Possible during operation

Isolation Method
Emergency stop circuit

Delivery Method
Freight carriers with global network

Touching Condition
Only after 10 minutes of switching OFF

Maximum Torque
148Nm

Balancing Method
Complete featherkey

Effect of Linear Expansion
Negative on accuracy at 100K.

Frequently Asked Questions

How does the 0.033 kg·m² inertia of MKD112C-024-KP0-RN affect servo loop tuning and acceleration in indexing/contouring tasks?

Its lower inertia eases acceleration yet demands careful gain scheduling to avoid overshoot with the motor’s 38 Nm stall capability. It supports crisp position settling for packaging and robotics when jerk limits are enforced.

For the three-phase supply on MKD112C-024-KP0-RN, which drive/cabling practices minimize common-mode noise and feedback interference?

The use of resolver-compatible drives and shielded motor/feedback cables with proper 360° shield terminations at the cabinet bulkhead maintain separation from mains.

How do the 192 mm flange and 130 mm centering diameter streamline mechanical retrofits?

These standardized interfaces simplify drop-in swaps on machinery designed around MKD112 geometry to preserve alignment and concentricity tolerances. It shortens fixture redesign while keeping shaft-height and coupling envelopes constant.

How do 38 Nm continuous torque and a 3000 RPM base speed map to application classes?

They align well with pick-and-place robotics to form-fill-seal axes and machine-tool feeds that need brisk indexing with steady torque. It is useful in industries such as robotics, printing and food lines among typical MKD112 deployments.

How does the right-hand connector orientation on MKD112C-024-KP0-RN influence cabinet layout and bend-radius planning?

It determines cable exit and strain-relief geometry that often permits tighter routing on right-hinged enclosures. It maintains manufacturer-specified minimum bend radii to protect resolver leads from induced noise and premature insulation fatigue.

Common Misspellings

Internal Product Review

The MKD112C-024-KP0-RN motor from Indramat generates 38 Nm stall torque and offers 3000 RPM of rated speed. It inertia value is 0.033 kg·m² for agile indexing and its multiturn absolute resolver feedback preserves repeatability without homing. This motor is powered from a three-phase 380 – 480 V source and it possess keyway shaft to fit into packaging, CNC machining and robotics.

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the MKD112C-024-KP0-RN.

Exchange

Want to sell your MKD112C-024-KP0-RN?

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.