R911305760 (MKD112B-048-KP2-BN)
MKD Synchronous Motors
Technical Specifications
Use
Industrial automation applications
Mounting
Attachment flange, DIN 42948
Bearing Shaft
Accommodates many radial loads
Excitation
Permanent magnet
Commutation
Electronic
Design
Low inertia due to special magnetic makeup
Holding Brake
32 Nm torque
Output Shaft
Keyway, sealing ring
Electrical Connection
Plug-in connector
Power Connection Port
B-side
Nominal Speed
3500 RPM
Max Torque
102 Nm
Weight
34 kg
Winding Inductance
4.8 mH
Protection Category
IP 65
Insulation Class
F
Mounting Elevation
1000 meters above sea level
Acceptable Ambient Temperature
0 – 45 oC
Frequently Asked Questions
What top speed supports fast indexing and short non-cut time on MKD112B-048-KP2-BN?
It reaches 5000 RPM maximum speed. That capability shortens traverse segments and enables higher throughput, provided tooling and reducers remain within mechanical limits and the drive maintains current headroom during rapid moves.
Which supply value should the drive architecture reference for MKD112B-048-KP2-BN?
It specifies 162 V rated voltage. Pairing the DC link and inverter to this level protects modulation range and current margins, preventing saturation when motion profiles demand brisk accelerations or decelerations.
How does chassis mass influence vibration behavior on MKD112B-048-KP2-BN?
It weighs 29 kg. The mass aids damping during reversals, informs bracket stiffness, and simplifies handling, all of which support repeatable accuracy in modular cells and gantry axes.
What cabling orientation improves accessibility in tight cabinets for MKD112B-048-KP2-BN?
It uses Side B connection direction. This orientation enables neat harness routing and strain relief, keeping bend radii correct and reducing electrical noise coupling near sensitive control hardware.
Which face maintains structural rigidity under reversing torque on MKD112B-048-KP2-BN?
It employs a 192 mm flange size. The generous mounting area distributes reaction forces and keeps interfaces square, reducing micro-movement that otherwise degrades coupling life and positional stability.
Common Misspellings
MKD 112B-048-KP2-BN
MKD-112B-048-KP2-BN
MKD112B-O48-KP2-BN
MKD112B048KP2BN
MKD112B 048 KP2 BN
mkd112b-048-kp2-bn
Internal Product Review
Indramat's MKD112B-048-KP2-BN simplifies panel layout with side B connection, keeping bends short and service loops accessible. Made for synchronized axes, it supports disciplined positioning and straightforward replacements in fast-moving production environments without rewiring between shifts.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MKD112B-048-KP2-BN.
Exchange
Want to sell your MKD112B-048-KP2-BN?
