R911308368 (MKD041B-058-GG0-KN)
MKD Synchronous Motors
Technical Specifications
Product Type
Synchronous Permanent Magnet Motor
Length
2.7nm
Flange Size
82mm
Centering Diameter
50mm
Winding Code
058
Shaft Sealing Ring
Yes
Keyway
No
Feedback
Resolver Single-turn
Holding Brake
No
Durability Indicator
Fault and Error Code System
Maximum Speed
7000 RPM
Rated Speed
5000 RPM
Rated Frequency
250Hz
Rated Voltage
386V
Continuous Current at Standstill
3.4A
Peak Current
15.3A
Mass
4.4 kilograms
Protection Category
IP65
Frequently Asked Questions
How is static capability defined for MKD041B-058-GG0-KN under stall conditions?
The MKD041B-058-GG0-KN provides 2.7 Nm continuous torque at standstill. This capacity supports clamping, indexing and dwell steps without auxiliary brakes, keeping workloads steady while controllers hold position.
Which flange dimension guides reducer selection for MKD041B-058-GG0-KN?
The MKD041B-058-GG0-KN uses an 82 mm flange size. This measurement aligns with common reducers and face-mount brackets, enabling straightforward integration on existing platforms.
How does feedback style inform control strategy on MKD041B-058-GG0-KN?
The MKD041B-058-GG0-KN uses resolver feedback with relative detection. This scheme reports incremental motion accurately, supporting closed-loop control where battery-backed absolute memory is not required.
What direction convention applies at the output of MKD041B-058-GG0-KN?
The MKD041B-058-GG0-KN lists output direction K. This designation standardizes mechanical orientation, allowing designers to match drivetrain assumptions with catalog conventions during layout.
How is brake configuration defined on MKD041B-058-GG0-KN?
Weighing 35 kg, the motor’s mass informs bracket and support design. The weight also provides natural damping that reduces vibration and improves operational stability.
Common Misspellings
MKD 041B-058-GG0-KN
MKD-041B-058-GG0-KN
MKD041B058GG0KN
MKDO41B-O58-GGO-KN
MKD041B 058 GG0 KN
mkd041b-058-gg0-kn
MKD41B-058-GG0-KN
Internal Product Review
The MKD041B-058-GG0-KN favors durable service in heavier applications, making it a must have for consistent delivery. Relative feedback and standardized geometry assist reproducible builds, enhancing alignment practices and reducing setup variability across high-duty stations.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MKD041B-058-GG0-KN.
Exchange
Want to sell your MKD041B-058-GG0-KN?
