MLS100S-3A-0600-NNNN

The MLS100S-3A-0600-NNNN is a secondary segment for a synchronous linear motor manufactured by Bosch Rexroth Indramat within the MLS Synchronous Linear Motors series. As the moving element of the magnetic drive, it interacts with a stationary primary track and drive inverter to generate thrust directly along the machine axis. Eliminating ballscrews or belts, it allows precise point-to-point positioning and smooth velocity control in automated assembly cells, gantry loaders, and processing equipment where rapid, maintenance-reduced travel is required.

The secondary segment has a depth of 135 mm, giving adequate cross-section for magnetic flux while keeping the profile low. Its overall width measures 600 mm, matching the 0600 segment code and enabling modular tiling of multiple sections along the stator rail. The active steel and magnet assembly weighs 8.0 kg, a figure that must be considered when calculating bearing loads and permissible acceleration. Classified as motor size 100, the unit shares winding geometry and cooling demands with other size-100 elements in the series. An ingress rating of IP65 seals the housing against dust and water jets so it can be mounted on open-frame machinery without additional covers.

The enclosure is fabricated from Titanium-Alloyed Stainless Steel, providing high corrosion resistance without adding significant magnetic reluctance. Mounting is straightforward because the segment is prepared for fixing with screws, allowing repeatable alignment during machine builds. A detachable guard supplied with cover sheet protects the magnet face during handling and blocks ferromagnetic debris once the motor is in service. Finally, the designation S confirms that this module is the secondary moving part; drive current is carried through flexible cable chains while the primary track stays stationary.